TLC5510, TLC5510A
8-BIT HIGH-SPEED ANALOG-TO-DIGITAL CONVERTERS
SLAS095K – SEPTEMBER 1994 – REVISED MAY 1999
5-V Single-Supply Operation
features
Low Power Consumption
TLC5510 . . . 127.5 mW Typ
TLC5510A . . . 150 mW Typ
Analog Input Range
– TLC5510 . . . 2 V Full Scale
– TLC5510A . . . 4 V Full Scale
(includes reference resistor dissipation)
8-Bit Resolution
TLC5510 is Interchangeable With Sony
CXD1175
Integral Linearity Error
±0.75 LSB Max (25°C)
±1 LSB Max (–20°C to 75°C)
applications
Differential Linearity Error
±0.5 LSB Max (25°C)
Digital TV
Medical Imaging
±0.75 LSB Max (–20°C to 75°C)
Video Conferencing
High-Speed Data Conversion
QAM Demodulators
Maximum Conversion Rate
20 Mega-Samples per Second
(MSPS) Max
†
PW OR NS PACKAGE
(TOP VIEW)
description
TheTLC5510andTLC5510AareCMOS, 8-bit, 20
MSPS analog-to-digital converters (ADCs) that
utilize a semiflash architecture. The TLC5510 and
TLC5510A operate with a single 5-V supply and
typically consume only 130 mW of power.
Included is an internal sample-and-hold circuit,
parallel outputs with high-impedance mode, and
internal reference resistors.
OE
DGND
D1(LSB)
D2
DGND
1
24
23
22
21
20
19
18
17
16
15
14
13
REFB
2
REFBS
AGND
3
4
D3
AGND
5
D4
ANALOG IN
6
D5
V
7
DDA
D6
REFT
8
The semiflash architecture reduces power
consumption and die size compared to flash
converters. By implementing the conversion in a
2-step process, the number of comparators is
significantly reduced. The latency of the data
output valid is 2.5 clocks.
D7
REFTS
9
D8(MSB)
V
10
11
DDA
V
V
DDD
DDA
CLK 12
V
DDD
†
Available in tape and reel only and ordered
as the shown in the Available Options table
below.
The TLC5510 uses the three internal reference
resistors to create a standard, 2-V, full-scale
conversion range using V
. Only external jumpers are required to implement this option and eliminates the
DDA
need for external reference resistors. The TLC5510A uses only the center internal resistor section with an
externally applied 4-V reference such that a 4-V input signal can be used. Differential linearity is 0.5 LSB at 25°C
and a maximum of 0.75 LSB over the full operating temperature range. Typical dynamic specifications include
a differential gain of 1% and differential phase of 0.7 degrees.
The TLC5510 and TLC5510A are characterized for operation from –20°C to 75°C.
AVAILABLE OPTIONS
PACKAGE
MAXIMUM FULL-SCALE
T
A
SOP (NS)
INPUT VOLTAGE
TSSOP (PW)
(TAPE AND REEL ONLY)
TLC5510IPW
–
TLC5510INSLE
TLC5510AINSLE
2 V
4 V
–20°C to 75°C
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265