TL431 Programmable Precision References
The TL431 integrated circuits are three-terminal
excellent replacements for zener diodes in many
applications such as digital voltmeters, power supplies,
and op amp circuitry. The 2.5 volt reference makes it
convenient to obtain a stable reference from 5.0 volt
logic supplies, and since the TL431 operates as a shunt
regulator, it can be used as either a positive or negative
voltage reference.
programmable shunt regulator diodes. These monolithic
IC voltage references operate as a low temperature
coefficient zener which is programmable from Vref to
36 volts with two external resistors. These devices
exhibit a wide operating current range of 1.0 to 100mA
with a typical dynamic impedance of 0.22 Ω. The
characteristics of these references make them
FEATURES
PINARRANGEMENT
l
l
l
l
Programmable Output Voltage to 36 Volts
Low Dynamic Output Impedance, 0.22 Ω Typical
Sink Current Capability of 1.0 to 100 mA
Equivalent Full-Range Temperature Coefficient of
50 ppm/oC Typical
TO-92
DIP-8
Pin: 1. Cathode
l
Temperature Compensated for operation over
Full Rated Operating Temperature Range
Low Output Noise Voltage
Pin: 1. Reference
2. Anode
6. Anode
8. Reference
Other Pins: NC
3. Cathode
l
SOP-8
CIRCUITSCHEMATIC
Pin: 1. Cathode
5. NC
2. Anode
3. Reference
4. NC
6. Anode
7. Anode
8. Reference
This SOP-8 is an internally modified SOP-8 Package.
Pins 2, 3, 6 and 7 are electrically common to the die
attach flag. This internal lead frame modification
decreases package thermal resistance and increases
power dissipation capability when appropriately
mounted on a printed circuit board. This SOP-8
conforms to all external dimensions of the standard
SOP-8 package.
SYMBOL
FUNCTIONAL BLOCK DIAGRAM
ORDERINGINFORMATION
Temperature
Device
TL431CT
TL431CD
TL431CS
TL431IT
TL431ID
TL431IS
Range
Package
TO-92
DIP-8
SOP-8
TO-92
DIP-8
0 to +70 oC
-40 to +85 oC
SOP-8
9-1