Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TL1963A-Q1
SLVSA79A –APRIL 2010–REVISED SEPTEMBER 2016
TL1963A-Q1 1.5-A Low-Noise Fast-Transient-Response Low-Dropout Regulator
1 Features
3 Description
The TL1963A-Q1 device is a low-dropout (LDO)
regulator optimized for fast transient response. The
device can supply 1.5 A of output current with a
dropout voltage of 340 mV. Operating quiescent
current is 1 mA, dropping to less than 1 µA in
shutdown. Quiescent current is well controlled; it does
not rise in dropout as it does with many other
regulators. In addition to fast transient response, the
TL1963A-Q1 regulators have very low output noise,
which makes them ideal for sensitive RF supply
applications.
1
•
Qualified for Automotive Applications
•
AEC-Q100 Test Guidance With the Following:
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature
–
–
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C6
•
•
•
•
•
•
•
•
Optimized for Fast Transient Response
Output Current: 1.5 A
Dropout Voltage: 340 mV
Output voltage range is from 1.21 V to 20 V. The
TL1963A-Q1 regulators are stable with output
capacitors as low as 10 µF. Small ceramic capacitors
can be used without the necessary addition of ESR,
as is common with other regulators. Internal
Low Noise: 40 µVRMS (10 Hz to 100 kHz)
1-mA Quiescent Current
No Protection Diodes Required
Controlled Quiescent Current in Dropout
protection
circuitry
includes
reverse-battery
Fixed Output Voltages: 1.5 V, 1.8 V, 2.5 V,
and 3.3 V
protection, current limiting, thermal limiting, and
reverse-current protection. The devices are available
in fixed output voltages of 1.5 V, 1.8 V, 2.5 V, and
3.3 V, and as an adjustable device with a 1.21-V
reference voltage. The TL1963A-Q1 regulators are
available in the 5-pin TO-263 (KTT) package.
•
•
•
•
•
•
•
Adjustable Output Voltage: 1.21 V to 20 V
Less Than 1-µA Quiescent Current in Shutdown
Stable With 10-µF Output Capacitor
Stable With Ceramic Capacitors
Reverse-Battery Protection
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
No Reverse Current
TL1963A-Q1
TO-263 (5)
10.16 mm × 8.42 mm
Thermal Limiting
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
2 Applications
•
•
3.3-V to 2.5-V Logic Power Supplies
Post Regulator for Switching Supplies
Simplified Schematic
IN
OUT
2.5 V at 1 A
+
C1
10 µF
C2
10 µF
VIN = 5 V
R2
4.22 kΩ
-
TL1963A-Q1
SHDN
GND
ADJ
R1
4.0 kΩ
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.