TK717xxS
LOW DROPOUT VOLTAGE REGULATOR
APPLICATIONS
FEATURES
n BatteryPoweredSystems
n Very Good Stability (CL = 0.22 mF is Stable For
Any Type Capacitor withVOUT ³ 1.8 V)
n MeasurementSystems
n Built-in Shunt Circuit of Output to GND. The Stored
n MobileCommunicationsSystems
n Cordless Phone, PHS, GSM, CDMA
n IndustrialEquipment
Energy of the Output Capacitor is Discharged
Quickly
n Wide Operating Voltage Range (1.8 V ~ 14 V)
n PersonalComputers,BarcodeReaders
n Very Low Dropout Voltage (VDROP = 103 mV at
low quiescent current of 72 mA at no load and 0.8 mA with
a 50 mA load. The standby current is typically 100 pA. The
circuitfeaturesverygoodstability.Theripplerejectionis90
dB at 400 Hz and 80 dB at 1 kHz. Stable operation is
achieved with an output capacitor as low as 0.22 mF; a
capacitorofanytypemaybeused.(However,thelargerthe
outputcapacitoris,thebettertheoverallcharacteristicswill
be.)
100mA)
n Peak Output Current is 370 mA (0.3 V DROP Point)
n Very Low Quiescent Current (IQ = 72 uA at IOUT = 0 mA)
n Good Ripple Rejection Ratio (80 dB at 1 kHz)
n High Precision Output Voltage (± 1.5 % or ± 50 mV)
n Suitable for Very Low Noise Applications
n Built-in Active High On/Off Control (0.1 mA Max
StandbyCurrent)
TheTK717xxSisavailableinaverysmallSOT23-5surface
mountpackage.
n Built-in Short Circuit Protection
n Built-in Thermal Shutdown
n Very Small Surface Mount Package (SOT23-5)
TK717xxS
DESCRIPTION
V
IN
V
OUT
TK717xxS is a low dropout linear regulator with a built-in
electronic switch. The internal switch can be controlled by
TTL or CMOS logic levels. The device is in the ON state
whenthecontrolpinispulledtoalogichighlevel.IntheOFF
state, the output impedance becomes very low, quickly
dischargingtheoutputcapacitor.Anexternalcapacitorcan
be connected to the noise bypass pin to lower the output
noiselevelto30~50mVRMS.AninternalPNPpasstransistor
is included to achieve a low dropout voltage of 103 mV at
100 mA load current. The TK717xx has an exceptionally
GND
CONTROL
NOISE
BYPASS
BLOCKDIAGRAM
ORDERING INFORMATION
TK717
S L
V
OUT
V
IN
CONTROL CIRCUIT
Voltage Code
Package Code
Tape/Reel Code
CONTROL
CONSTANT
CURRENT
SOURCE
Operating Temp. Range
+
-
THERMAL &
OVER CURRENT
PROTECTION
BANDGAP
REFERENCE
VOLTAGE CODE
TAPE/REEL CODE
L: Tape Left
15 = 1.5 V 24 = 2.4 V 33 = 3.3 V 42 = 4.2 V
16 = 1.6 V 25 = 2.5 V 34 = 3.4 V 43 = 4.3 V
17 = 1.7 V 26 = 2.6 V 35 = 3.5 V 44 = 4.4 V
18 = 1.8 V 27 = 2.7 V 36 = 3.6 V 45 = 4.5 V
19 = 1.9 V 28 = 2.8 V 37 = 3.7 V 46 = 4.6 V
20 = 2.0 V 29 = 2.9 V 38 = 3.8 V 47 = 4.7 V
21 = 2.1 V 30 = 3.0 V 39 = 3.9 V 48 = 4.8 V
22 = 2.2 V 31 = 3.1 V 40 = 4.0 V 49 = 4.9 V
23 = 2.3 V 32 = 3.2 V 41 = 4.1 V 50 = 5.0 V
AUTO
DISCHARGE
CIRCUIT
OPERATING TEMP. RANGE
C: -30 ~ 80°C
NOISE
BYPASS
GND
PACKAGE CODE
S: SOT23-5
October 2001 TOKO, Inc.
Page1