APPLICABLE STANDARD
-40C TO +105C
-55C TO +85C
OPERATING
STORAGE
1
2
TEMPERATURE RANGE
TEMPERATURE RANGE
RATING
VOLTAGE
130V AC, 130V DC
2A/ PIN
―
―
AWG#20 TO AWG#22
4
CURRENT
APPLICABLE CABLE
AWG#20 (RAILWAY VINYL CABLE:WV0)
(RAILWAY VINYL CABLE:WV0)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
X
X
X
X
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
ELECTRICAL CHARACTERISTICS
10 m MAX.
X
X
X
-
-
-
100 mA (DC OR 1000 Hz) MAX.
CONTACT RESISTANCE
INSULATION RESISTANCE
VOLTAGE PROOF
3
5000 M MIN.
500 V DC.
1260 V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
EXTRACTION FORCES
APPRICABLE CONTACT.
INSERTION FORCE : 1.23 N MAX.
EXTRACTION FORCE : 0.15 N MIN.
INSERTION FORCE : 81.7 N MAX.
EXTRACTION FORCE : 6.2 N MIN.
X
X
X
-
-
-
CONNECTOR INSERTION AND
EXTRACTION FORCES
APPRICABLE CONNECTOR.
CONTACT(LANCE)
PULL A TERMINAL BY 29.4 N (1 min.) FROM TERMINAL AREA. 1) CONTACTS SHOULD BE RETAINED.
2) NO DAMAGE. CRACK AND LOOSENESS OF PARTS.
RETENTION FORCES
CRIMP THE CABLE ONLY AT THE CONDUCTOR, AND RETENTION 1) AWG#20(0.5sq) : 57.9 N MIN.
FORCE SHALL EXCEED THE SPECIFICATION WHEN PULL FORCE 2) AWG#22(0.3sq) : 35.6 N MIN.
IS APPLIED.
CONDUCTOR PRESSURE BONDING
FORCES
X
X
X
-
-
-
500 TIMES INSERTIONS AND EXTRACTIONS.
1) CHANGE IN CONTACT RESISTANCE OF
3
CONTACTS :20 m MAX.
MECHANICAL OPERATION
VIBRATION
2) NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
1) NO ELECTRICAL DISCONTINUITY OF 10 s.
2) NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
FREQUENCY : 10 TO 55 Hz, SINGE AMPLITUDE 0.75 mm,
AT 2 h, FOR 3 AXIAL DIRECTIONS.
(REFER TO AN ATTACHED FIGURE)
JIS E 4031 CATEGORY 1 CLASS B
FREQUENCY:5~150Hz
1) NO ELECTRICAL DISCONTINUITY OF 10 s.
VIBRATION
2) NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
(RAILWAY RANDOM VIBRATION CONDITION m/s2
ASD LEVEL(m/s2)2/Hz
X
X
TEST)
7.90
1.857
3 AXIAL DIRECTIONS, 5 h EACH.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES IN 3 BOTH
AXIAL DIRECTIONS. HALF-SINE WAVE.
1) NO ELECTRICAL DISCONTINUITY OF 10 s.
-
SHOCK
2) NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
① THE PRODUCT PERFORMANCE IS GUARANTEED ONLY IN THE TEMPERATURE ADEQUATE PEOPLE’S ACTIVITIES.
② INCLUDE TEMPERATURE RISE CAUSED BY CURRENT-CARRYING.
1
③ SPECIFICATIONS FOR ASSEMBLED ITEM WITH APPLICABLE HOUSING.
2
PACKING MATERIALS ARE NOT INCLUDED.
CABLE CONDUCTOR RESISTANCE IS NOT INCLUDED.
THE VALUE VARIES DEPENDING ON BOARD DESIGN AND CABLE.
3
4
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
ABOVE SPESIFICATION SHOWS THE VALUES IN ASSEMBLED CONDITION WITH
APPROVED
CHECKED
DESIGNED
DRAWN
NM.NISHIMATSU
KN.ICHIKAWA
TS.ITO
15.10.27
15.10.27
15.10.27
15.10.27
APPLICABLE CRIMP CONTACTS.
Unless otherwise specified, refer to IEC 60512.
AK.AKIYAMA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-128057-30-00
TJ50A-2022SCA(30)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/2
CL236-3104-9-30
FORM HD0011-2-1