DAC0830, DAC0832
www.ti.com
SNAS534B –MAY 1999–REVISED MARCH 2013
DAC0830/DAC0832 8-Bit μP Compatible, Double-Buffered D to A Converters
Check for Samples: DAC0830, DAC0832
1
FEATURES
KEY SPECIFICATIONS
234
•
Double-Buffered, Single-Buffered or Flow-
Through Digital Data Inputs
•
•
•
Current Settling Time: 1 μs
Resolution: 8 bits
•
Easy Interchange and Pin-Compatible with 12-
bit DAC1230 Series
Linearity: 8, 9, or 10 bits (Ensured Over
Temp.)
•
•
•
Direct Interface to All Popular
Microprocessors
•
•
•
Gain Tempco: 0.0002% FS/°C
Low Power Dissipation: 20 mW
Single Power Supply: 5 to 15 VDC
Linearity Specified with Zero and Full Scale
Adjust Only—NOT BEST STRAIGHT LINE FIT.
Works with ±10V Reference-Full 4-Quadrant
Multiplication
DESCRIPTION
The DAC0830 is an advanced CMOS/Si-Cr 8-bit
multiplying DAC designed to interface directly with the
8080, 8048, 8085, Z80®, and other popular
microprocessors. A deposited silicon-chromium R-2R
resistor ladder network divides the reference current
and provides the circuit with excellent temperature
tracking characteristics (0.05% of Full Scale Range
maximum linearity error over temperature). The circuit
uses CMOS current switches and control logic to
achieve low power consumption and low output
leakage current errors. Special circuitry provides TTL
logic input voltage level compatibility.
•
•
Can Be Used in the Voltage Switching Mode
Logic Inputs Which Meet TTL Voltage Level
Specs (1.4V Logic Threshold)
•
•
Operates “STAND ALONE” (without μP) if
Desired
Available in 20-Pin SOIC or PLCC Package
Double buffering allows these DACs to output a
voltage corresponding to one digital word while
holding the next digital word. This permits the
simultaneous updating of any number of DACs.
The DAC0830 series are the 8-bit members of a
family of microprocessor-compatible DACs (MICRO-
DAC).
Typical Application
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
BI-FET is a trademark of Texas Instruments.
Z80 is a registered trademark of Zilog Corporation.
All other trademarks are the property of their respective owners.
2
3
4
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated