TL5001, TL5001A
PULSE-WIDTH-MODULATION CONTROL CIRCUITS
SLVS084F – APRIL 1994 – REVISED JANUARY 2002
D, JG OR P PACKAGE
(TOP VIEW)
Complete PWM Power Control
3.6-V to 40-V Operation
Internal Undervoltage-Lockout Circuit
Internal Short-Circuit Protection
Oscillator Frequency . . . 20 kHz to 500 kHz
OUT
GND
RT
DTC
SCP
1
2
3
4
8
7
6
5
V
CC
COMP
FB
Variable Dead Time Provides Control Over
Total Range
FK PACKAGE
(TOP VIEW)
±3% Tolerance on Reference Voltage
(TL5001A)
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
3
4
2
1
20 19
NC
NC
RT
18
17
16
15
14
V
5
6
7
CC
NC
NC
DTC
NC
description
COMP
NC
The TL5001 and TL5001A incorporate on a single
monolithic chip all the functions required for a
pulse-width-modulation (PWM) control circuit. De-
signed primarily for power-supply control, the
TL5001/A contains an error amplifier, a regulator, an
oscillator, a PWM comparator with a dead-time-con-
8
9
10 11 12 13
trol
input,
undervoltage
lockout
(UVLO), short-circuit protection (SCP), and an open-collector output transistor. The TL5001A has a typical
reference voltage tolerance of ±3% compared to ±5% for the TL5001.
The error-amplifier common-mode voltage ranges from 0 V to 1.5 V. The noninverting input of the error amplifier
is connected to a 1-V reference. Dead-time control (DTC) can be set to provide 0% to 100% dead time by connecting
an external resistor between DTC and GND. The oscillator frequency is set by terminating RT with an external
resistor to GND. During low V
operating range.
conditions, the UVLO circuit turns the output off until V
recovers to its normal
CC
CC
The TL5001C and TL5001AC are characterized for operation from –20°C to 85°C. The TL5001I and TL5001AI are
characterized for operation from –40°C to 85°C. The TL5001Q and TL5001AQ are characterized for operation from
–40°C to 125°C. The TL5001M and TL5001AM are characterized for operation from –55°C to 125°C.
AVAILABLE OPTIONS
PACKAGED DEVICES
T
A
SMALL OUTLINE
(D)
PLASTIC DIP
(P)
CERAMIC DIP
(JG)
CHIP CARRIER
(FK)
TL5001CD
TL5001ACD
TL5001ID
TL5001AID
TL5001QD
TL5001AQD
—
TL5001CP
—
—
–20°C to 85°C
–40°C to 85°C
–40°C to 125°C
–55°C to 125°C
TL5001ACP
—
—
TL5001IP
—
—
TL5001AIP
—
—
—
—
—
—
—
—
—
—
TL5001MJG
TL5001AMJG
TL5001MFK
TL5001AMFK
—
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TL5001CDR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
unless otherwise noted. On all other products, production
testing of all parameters.
processing does not necessarily include testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265