THS3112
THS3115
SLOS385 – SEPTEMBER 2001
LOW-NOISE, HIGH-SPEED CURRENT FEEDBACK AMPLIFIERS
FEATURES
APPLICATIONS
D
Low Noise
D
D
D
D
Communication Equipment
Video Distribution
Motor Drivers
– 2.9 pA/√Hz Noninverting Current Noise
– 10.8 pA/√Hz Inverting Current Noise
– 2.2 nV/√Hz Voltage Noise
Piezo Drivers
D
D
Wide Supply Voltage Range ±5 V to ±15 V
Wide Output Swing
DESCRIPTION
– 25 V Output Voltage, R = 100 Ω, ±15-V
PP
L
Supply
The THS3112/5 are low-noise, high-speed current
feedback amplifiers, ideal for any application requiring
high output current. The low noninverting current noise
of 2.9 pA/√Hz and the low inverting current noise of 10.8
pA/√Hz increase signal to noise ratios for enhanced
signal resolution. The THS3112/5 can operate from
±5-V to ±15-V supply voltages, while drawing as little as
4.5 mA of supply current per channel. It offers low
D
D
High Output Current, 150 mA (Min)
High Speed
– 110 MHz (–3 dB, G=1, ±15 V)
– 1550 V/µs Slew Rate (G = 2, ±15 V)
D
D
Low Distortion, G = 2
– -78 dBc (1 MHz, 2 V , 100-Ω load)
PP
Low Power Shutdown (THS3115)
– 300-µA Shutdown Quiescent Current Per
Channel
–78-dBc total harmonic distortion driving 2 V
into a
PP
100-Ω load. The THS3115 features a low power
shutdown mode, consuming only 300-µA shutdown
quiescent current per channel. The THS3112/5 is
packaged in a standard SOIC, SOIC PowerPAD , and
TSSOP PowerPAD packages.
D
D
D
Thermal Shutdown and Short Circuit
Protection
Standard SOIC, SOIC PowerPAD , and
TSSOP PowerPAD Package
Evaluation Module Available
VOLTAGE NOISE AND CURRENT NOISE
vs
THS3115
SOIC (D) AND
TSSOP PowerPAD (PWP) PACKAGE
(TOP VIEW)
THS3112
FREQUENCY
SOIC (D) AND
SOIC PowerPAD (DDA) PACKAGE
(TOP VIEW)
100
V
T
= ±5 V to ±15 V
CC
= 25°C
A
I
n–
1 OUT
1 IN–
1 IN+
V
CC+
1
2
3
4
8
7
6
5
1 OUT
1 IN–
1 IN+
V
CC+
1
2
3
4
5
6
7
14
2 OUT
2 IN–
2 IN+
13 2 OUT
12 2 IN–
11 2 IN+
I
10
n+
V
CC–
V
CC–
N/C
10
9
N/C
V
n
GND
N/C
SHUTDOWN
N/C
8
1
10
100
1 K
10 K
100 K
f – Frequency – Hz
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2001, Texas Instruments Incorporated
1
www.ti.com