TGL41-6.8 THRU TGL41-200A
SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 200 Volts
Peak Pulse Power - 400 Watts
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
DO-213AB
♦ For surface mounted applications
♦ Glass passivated junction
SOLDERABLE ENDS
♦ Excellent clamping capability
1st BAND
♦ Low incremental surge resistance
♦ Fast response time typically less than 1.0ps from
D1=
D2
0 Volts to V
(BR)
0.105
0.095
(2.67)
(2.41)
♦ 400W peak pulse capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
♦ For devices with V
than 1.0µA
♦ High temperature soldering guaranteed:
≥10V, I are typically less
D
(BR)
0.022 (0.56)
0.018 (0.46)
+ 0
D2 = D1
- 0.008 (0.20)
0.205 (5.2)
0.185(4.7)
250°C/10 seconds at terminals
1st band denotes type and positive end (cathode)
MECHANICAL DATA
Case: JEDEC DO-213AB molded plastic body over
passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Dimensions in inches and (millimeters)
Polarity: Blue bands denotes the cathode which is positive
with respect to the anode under normal TVS operation
Mounting Position: Any
Available in uni-directional only
Weight: 0.116 gram, 0.0046 ounce
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATINGS
SYMBOL
PPPM
VALUE
Minimum 400
1.0
UNITS
Watts
Watt
Peak pulse power dissipation with a
10/1000µs waveform (NOTE 1, FIG. 1)
Steady state power dissipation at TL=75°C (NOTE 2)
PM(AV)
IPPM
Peak pulse current with a 10/1000µs waveform
(NOTE 1, FIG. 3)
Amps
SEE TABLE 1
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load for unidirectional only
(JEDEC Method) (NOTE 3)
IFSM
40.0
Amps
Maximum instantaneous forward voltage at 25A
for unidirectional only
VF
3.5
Volts
°C
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
2
2
(2) Mounted on copper pads to each terminal of 0.31 in (8.0 mm ) per Fig. 5
(3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
1/20/99