Datasheet > TGHPV100RKE

TGHPV100RKE

更新时间： 2024-09-19 13:47:35

品牌	Logo	应用领域
OHMITE		/
页数	文件大小	规格书
2页	440K
描述
SOT-227 600W 100 OHM

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

TGHPV100RKE 数据手册

TGH600 Series

600 Watt Thick Film SOT227 Package

Due to the TGH600's non-inductive design, they

are deally suited for high-frequency and pulse-

load applications. The TGH600 series resistors are

designed for direct mounting onto a heatsink and

provides up to 600 watts of power dissipation.

Popular applications include variable speed drives,

power supplies, control devices, telecom, robotics,

motor controls, and other switching designs.

cHaꢀacTꢁꢀꢂSTꢂcS

0.25 to 1K

Ohmic range

Resistance tolerance

Temperature coefficient

Maximum working voltage

Power rating

Derating

±10%; ±5% on request

100

600

480

±250ppm/°C (others on request)

1000V DC (higher voltage on request)

600W at 85°C bottom case temperature. Note:

Liquid cooling required to achieve full power rating.

360

240

120

Dielectric strength up to 4,000VDC against ground

between R1 and R2: 500V; 1,000V on request

2kVrms, <80pC

Electric strength voltage

Isolation voltage

Partial discharge

25 50

85100 125 150 175

Bottom of base plate Temperature, °C

10GΩ min. at 1kV

Insulation resistance

Short time overload

Derating (thermal resistance): 8.33 W/K (0.12 K/W)

(for conf. 1, 2, 3) Best results can be obtained by

using a thermal transfer compound with a heat con-

ductivity of at least 2.9 W/mK. The flatness of the

cooling plate must be better than 0.05 mm overall.

Surface roughness should not exceed 6.4 μm.

1.25 x rated power at 85°C bottom case temp. for

10 sec, ΔR = 0.4% max.

-55°C to +155°C

Operating temperature

Mtg. torque for base plate

Mtg. torque for contacts

(static) 1.3 Nm to 1.5 Nm M4 screws

(static) 1.1 Nm to 1.3 Nm M4 screws, screw-in

depth max. 5mm

Configurations

(per package)

Config. 1 (V)

Config. 2 (X)

Config. 3 (Y)

Pꢁꢀfoꢀmancꢁ DaTa

Test Method

ΔR

MIL-Std-202, Method 106

(0.5% + 0.001W) max

(0.3% + 0.01W) max

Moisture Resistance

Mil-Std-202, Method 107, Cond F

Thermal shock

Terminal Strength

Vibration, High Frequency

Life

MIL-Std-202, Method 211, Cond A (pull test) 2.4N (0.2% = 0.01W) max

MIL-Std-202, Method 204, Cond D (0.2% + 0.01W) max

20 years (120,000 hours) Operating failure rate of 8.3 x 10-7 fail/hour.

Requirements to be achieved under the following conditions: T^amb=25°C, THS=70°C, Papplied=Pn

(continued)

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com

156

中文翻译

下载PDF

与TGHPV100RKE相关器件

型号	品牌	获取价格	描述	数据表
TGHPV10R0KE	OHMITE	获取价格	SOT-227 600W 10 OHM
TGHPV150RKE	OHMITE	获取价格	SOT-227 600W 150 OHM
TGHPV15R0KE	OHMITE	获取价格	SOT-227 600W 15 OHM
TGHPV1K00KE	OHMITE	获取价格	SOT-227 600W 1000 OHM
TGHPV1R00KE	OHMITE	获取价格	SOT-227 600W 1 OHM
TGHPV250RKE	OHMITE	获取价格	SOT-227 600W 250 OHM
TGHPV27R0KE	OHMITE	获取价格	SOT-227 600W 27 OHM
TGHPV470RKE	OHMITE	获取价格	SOT-227 600W 470 OHM
TGHPV50R0KE	OHMITE	获取价格	SOT-227 600W 50 OHM
TGHPV5R00KE	OHMITE	获取价格	SOT-227 600W 5 OHM