NOTES:
REVISION CW
CW
TFM-1XX-XX-XXX-X-XXX
1. MINIMUM PUSHOUT FORCE TO BE 12 OZ RETENTION FOR CONTACTS AND WELD TABS.
2. COPLANARITY: .004[.10] = POS 02 THRU 26
C1
OPTION
No OF POSITIONS
LEAD STYLE -01: (-5 THRU -50 ALL
POSITIONS AVAILABLE)
.006[.15] = POS 27 THRU 50
3. MANUFACTURING IN PROCESS DIMENSION DESIGNED TO ACHIEVE FINAL ASSEMBLY.
-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,
SEE TABLE 1) (SEE FIG. 8 SHEET 3)
(NOT AVAILABLE FOR -RA OR -RE)
-LC: LOCKING CLIP (USE LC-05-TM)
(NOT AVAILABLE FOR -RA OR -RE)
(SEE FIG. 10 SHEET 3) (SEE NOTE 13)
-P: PICK AND PLACE PAD (USE PPP-04)
(AVAILABLE IN ALL POSITIONS)
(NOT AVAILABLE FOR -RA OR -RE,
SEE FIG. 7 SHEET 3)
C
4.
REPRESENTS A CRITICAL DIMENSION.
5. [ ] DIMENSIONS ARE IN MILLIMETERS.
6. MEASURED FROM BEND.
LEAD STYLE -02: (-5 THRU -50 ALL
POSITIONS AVAILABLE)
7. DIMENSION CHANGED PER REVISION AD.
CONTACT ENGINEERING FOR INFORMATION.
8. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT
THE -01 & -02 WILL BE SOLID, NOT RIBBED.
9. MEASURE FROM TIPS OF PIN.
DO NOT
SCALE FROM
THIS PRINT
ALL OTHER LEAD STYLES: (-5 THRU -50 MULTIPLES OF 5)
LEAD STYLES -11, -12 POS 12, 16, 17 ALSO AVAILABLE
LEAD STYLES -21, -22, -31, -32
POS 12 AND 13 ALSO AVAILABLE
10. NOTE DELETED.
11. .003[.08] MAXIMUM TERMINAL BURR.
12. .005 MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS.
13. MINIMUM LOCKING CLIP RETENTION TO BE 8 OZS.
14. THIS FEATURE ONLY PRESENT ON -01 &-02 LEAD STYLES.
LEAD STYLE
-RA: RIGHT ANGLE
THROUGH HOLE
-01 (SEE FIG. 1)
-11 (SEE FIG. 1)
-21 (SEE FIG. 1)
-31 (SEE FIG. 1)
(AVAILABLE ONLY IN LEAD STYLE: -01
SEE FIG. 5, SHEET 2)
SURFACE MOUNT
-02 (SEE FIG. 2)
-12 (SEE FIG. 2)
-22 (SEE FIG. 2)
-32 (SEE FIG. 2)
-TR: TAPE AND REEL (SEE FIG. 4, SHEET 5)
-SA: STAKED ALIGNMENT PIN (SEE FIG. 9,
SHEET 3)(NOT AVAILABLE FOR
-RA OR -RE)
-K: POLYIMIDE FILM (SEE FIG. 3)
-WT: WELD TABS (USE WT-25-XX-T)
(AVAILABLE ON -01 AND -02 LEAD
STYLES ONLY) (SEE FIG. 6 SHEET 2)
(AVAILABLE ON -05, -07, -10, -15,
-20, -25, AND -30 POS ONLY)
(AVAILABLE WITH -L AND -S
(No. OF POSITIONS x .050[1.27]) + .125[3.18] REF
(No. OF POSITIONS x .050[1.27]) + .025[.64] REF
PLATING SPECIFICATION
-S: SELECTIVE
-L: LIGHT SELECTIVE
-F: FLASHED GOLD
.110 2.79
REF
-P: GOLD FLASHED PALLADIUM NICKEL
-G: GOLD
02
-H: HEAVY GOLD
.155 3.94
REF
PLATING ONLY) (NOT AVAILABLE
-SM: SELECTIVE HEAVY GOLD, MATTE TIN TAIL
-LM: SELECTIVE LIGHT GOLD, MATTE TIN TAIL
-FM: SELECTIVE FLASH GOLD, MATTE TIN TAIL
-STL: SELECTIVE TIN LEAD
CW
WITH -A, -LC, -RA, OR -SA OPTIONS)
*-RE1: RIGHT ANGLE ELEVATED .062 PCB
(USE TFM-XX-D-01-RE, NOT AVAILABLE
WITHOUT -WT, AVAILABLE IN LEAD
STYLE -01 ONLY, AVAILABLE IN -5
THRU -30 POSITIONS ONLY)
01
.050 1.27
.225 5.72
REF
SEE NOTE 14
BODY SPECIFICATION
.135 3.43 REF
REF
CW
-D: DOUBLE ROW
(SEE FIG. 11, SHEET 4)
*-RE2: RIGHT ANGLE ELEVATED .093 PCB
(USE TFM-XX-D-01-RE, NOT AVAILABLE
WITHOUT -WT, AVAILABLE IN LEAD
STYLE -01 ONLY, AVAILABLE IN -5
THRU -30 POSITIONS ONLY)
.075 1.91 REF
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
.050 1.27
C7
.135 3.43 REF
(SEE FIG. 12, SHEET 4)
.018 0.46
2 MAX TOE
(TYP)
2
MAX SWAY
(TYP)
"A"
* = NOT RELEASED FOR PRODUCTION
CW
.1635 4.153
REF
"D" REF
"A" REF
.096 2.44
(SEE NOTE 7)
SEE NOTE 8
C17
+.004[.10]
-.002[.05]
.010 0.25 REF
.014 0.36 REF
MAX SWAY (TYP)
"C"
.078±.003 1.97±0.08
C2
C8
"A"
.050 1.27
MAX TOE (TYP)
2
2
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
C5
SECTION "A"-"A"
IN-PROCESS
FIGURE 1
THROUGH HOLE
-01, -11, -21, -31
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
ANGLES
2
CW
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LIQUID CRYSTAL POLYMER, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
.050 X .050 TERMINAL STRIP
DWG. NO.
TFM-1XX-XX-XXX-X-XXX
CW
B RAY
7-10-2007
SHEET 1 OF 5
BY:
F:\DWG\SW\Exisprod\ASSEMBLY\050\TFM-1XX-XX-XXX-X-XXX.SLDDRW
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
