Datasheet > TFM-105-01-L-D-WT

TFM-105-01-L-D-WT

更新时间： 2024-09-18 18:14:35

品牌	Logo	应用领域
申泰 - SAMTEC		PC 连接器
页数	文件大小	规格书
7页	2593K
描述
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle,

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

TFM-105-01-L-D-WT 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8536.69.40.40	Factory Lead Time：	8 weeks
风险等级：	2.28	其他特性：	WITH WELD TAB, ROHS COMPLIANT
主体宽度：	0.225 inch	主体深度：	0.22 inch
主体长度：	0.513 inch	主体/外壳类型：	RECEPTACLE
连接器类型：	BOARD CONNECTOR	联系完成配合：	GOLD (15) OVER NICKEL (50)
联系完成终止：	Tin (Sn) - with Nickel (Ni) barrier	触点性别：	MALE
触点材料：	PHOSPHOR BRONZE	触点模式：	RECTANGULAR
触点电阻：	15 m Ω	触点样式：	SQ PIN-SKT
DIN 符合性：	NO	介电耐压：	825VAC V
耐用性：	100 Cycles	滤波功能：	NO
IEC 符合性：	NO	绝缘电阻：	5000000000 Ω
绝缘体颜色：	BLACK	绝缘体材料：	LIQUID CRYSTAL POLYMER (LCP)
JESD-609代码：	e3	MIL 符合性：	NO
插接触点节距：	0.05 inch	匹配触点行间距：	0.05 inch
混合触点：	NO	安装选项1：	LOCKING
安装方式：	STRAIGHT	安装类型：	BOARD
连接器数：	ONE	PCB行数：	2
装载的行数：	2	最高工作温度：	125 °C
最低工作温度：	-55 °C	选件：	GENERAL PURPOSE
PCB接触模式：	RECTANGULAR	PCB触点行间距：	1.27 mm
电镀厚度：	15u inch	极化密钥：	POLARIZED HOUSING
额定电流（信号）：	2.9 A	参考标准：	UL, CSA
可靠性：	COMMERCIAL	子类别：	Headers and Edge Type Connectors
端子长度：	0.078 inch	端子节距：	1.27 mm
端接类型：	SOLDER	触点总数：	10
UL 易燃性代码：	94V-0	Base Number Matches：	1

TFM-105-01-L-D-WT 数据手册

浏览型号TFM-105-01-L-D-WT的Datasheet PDF文件第2页

浏览型号TFM-105-01-L-D-WT的Datasheet PDF文件第3页

浏览型号TFM-105-01-L-D-WT的Datasheet PDF文件第4页

浏览型号TFM-105-01-L-D-WT的Datasheet PDF文件第5页

浏览型号TFM-105-01-L-D-WT的Datasheet PDF文件第6页

浏览型号TFM-105-01-L-D-WT的Datasheet PDF文件第7页

NOTES:

TFM-1XX-XX-XXX-D-XXX

REVISION FE

OPTION

REPRESENTS A CRITICAL DIMENSION.

No OF POSITIONS

2. MINIMUM PUSHOUT FORCE FOR CONTACTS, WELD TABS,

AND THREADED INSERTS: 12 OZ.

3. MINIMUM LOCKING CLIP RETENTION: 8 OZS.

4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[0.13]

5. MAXIMUM TERMINAL BURR: .003[0.08]

6. COPLANARITY: .004[0.10] = POS 02 THRU 26

.006[0.15] = POS 27 THRU 50

7. MEASURED FROM BEND.

8. DIMENSION CHANGED PER REVISION AD. CONTACT ENGINEERING

FOR INFORMATION.

9. MEASURE FROM TIPS OF PIN.

10. THIS FEATURE ONLY PRESENT ON -01 &-02 LEAD STYLES.

11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,

THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC

RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE

–LC OPTION.

12. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01, -02 & -03

WILL BE SOLID AND WITHOUT SIDE SLOTS.

13. NOTE DELETED.

-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,

SEE TABLE 1) (SEE FIG 8, SHT 3)

LEAD STYLE -01, -02, -03: -02 THRU -50 (ALL

DO NOT

SCALE FROM

THIS PRINT

POSITIONS AVAILABLE)

(NOT AVAILABLE FOR -RA OR -REX)

-LC: LOCKING CLIP (USE LC-05-TM)

(NOT AVAILABLE FOR -RA OR -REX)

(SEE FIG 10, SHT 3 & NOTES 3 & 11)

-P: PICK AND PLACE PAD (USE PPP-04)

(AVAILABLE IN ALL POSITIONS -05 THRU

-50 EXCEPT -05 WITH -WT)

LEAD STYLES -11, -12, -13: (-05 THRU -50 MULTIPLES OF 5)

POSITIONS 12, 16, 17 ALSO AVAILABLE

LEAD STYLES -21, 22, 23: (-05 THRU -50 MULTIPLES OF 5)

POSITIONS 12 & 13 ALSO AVAILABLE

LEAD STYLES 31, 32: 12 POSITION ALSO AVAILABLE

(NOT AVAILABLE FOR -RA OR -REX,

SEE FIG 7, SHT 3)

LEAD STYLE

-RA: RIGHT ANGLE

THROUGH HOLE

-01, -03 (SEE FIG 1)

-11, -13 (SEE FIG 1)

-21,-23 (SEE FIG 1)

-31 (SEE FIG 1)

SURFACE MOUNT

-02 (SEE FIG 2)

-12 (SEE FIG 2)

-22 (SEE FIG 2)

-32 (SEE FIG 2)

(AVAILABLE ONLY IN LEAD STYLE: -01

SEE FIG 5, SHT 2)

-TR: TAPE AND REEL (SEE FIG 4, SHT 7)

(NOT AVAILABLE WITH -DS OPTION

OR THROUGH HOLE LEAD STYLE)

-SA: STAKED ALIGNMENT PIN (SEE FIG 9, SHT 3)

(ONLY AVAILABLE ON SURFACE MOUNT

LEAD STYLE)

PLATING SPECIFICATION

-S: 30µ" SELECTIVE GOLD ON CONTACT AREA,

MATTE TIN TAIL

-L: 15µ" SELECTIVE GOLD ON CONTACT AREA,

MATTE TIN TAIL

-K: POLYIMIDE FILM (SEE FIG 3, SHT 2)

(USE K-DOT-.217-.313-.005)

(No OF POSITIONS x .050[1.27]) + .125[3.18] REF

(No OF POSITIONS x .050[1.27]) + .025[.64] REF

-F: 3µ" FLASH GOLD ON CONTACT AREA,

MATTE TIN TAIL

(NOT AVAILABLE FOR -RA OR -REX)

(ALL LEAD STYLES EXCEPT -21 AVAILABLE)

-WT: WELD TABS (USE WT-25-XX-T)

(AVAILABLE ON -01, -02 & -03 LEAD

STYLES ONLY) (SEE FIG 6, SHT 2)

(MATES WITH SFSS/SFSD -SR & -DR ONLY)

(NOT AVAILABLE WITH -A, -LC,

-H: 30µ" SELECTIVE GOLD ON CONTACT AREA,

3µ" FLASH GOLD ON TAIL

.110 2.79 REF

-SM: 30µ" SELECTIVE GOLD ON CONTACT AREA,

MATTE TIN TAIL

-LM: 15µ" SELECTIVE GOLD ON CONTACT AREA,

MATTE TIN TAIL

.155 3.94

REF

-RA, OR -SA OPTIONS)

-FM: 3µ" FLASH GOLD ON CONTACT AREA,

MATTE TIN TAIL

-RE1: RIGHT ANGLE ELEVATED .062 PCB

(USE TFM-XX-D-01-RE, NOT AVAILABLE

WITHOUT -WT, AVAILABLE IN LEAD

STYLE -01 ONLY, -03 THRU -50 POS)

(MATES WITH SFSS/SFSD -SR & -DR ONLY)

(SEE FIG 11, SHT 4)

-RE2: RIGHT ANGLE ELEVATED .093 PCB

(USE TFM-XX-D-01-RE, NOT AVAILABLE

WITHOUT -WT, AVAILABLE IN LEAD

STYLE -01 ONLY, -03 THRU -50 POS)

(MATES WITH SFSS/SFSD -SR & -DR ONLY)

(SEE FIG 11, SHEET 4)

-STL: 30µ" SELECTIVE GOLD ON CONTACT AREA,

TIN/LEAD (90/10 ±5%) TAIL

.050 1.27

REF

.225 5.72

REF

SEE NOTE 10

.075 1.91

REF

BODY SPECIFICATION

-D: DOUBLE ROW

.050 1.27

(No OF POSITIONS x .050[1.27]) - .050[1.27]

MAX SWAY

(EITHER DIRECTION)

.018 0.46 REF

.135 3.43 REF

-SN: SOLDER NAIL FOR .062 BOARD

(TFM-XX-D-01-SN AND WT-27-01-T)

(SEE FIG12, SHT 3)

"D" REF

MAX SWAY

"A"

(SEE TABLE 1,

SHT 7)

(EITHER DIRECTION)

(ONLY AVAILABLE WITH -02 LEAD STYLE)

(NOT AVAILABLE WITH OPTIONS -A, -LC,

-RA, -SA, -WT, -RE1 OR -RE2)

.096 2.44

.1635 4.153

REF

"A" REF

(SEE TABLE 1,

SHT 7)

(SEE NOTE 8)

-SN2: SOLDER NAIL FOR .093 BOARD

(TFM-XX-D-01-SN AND WT-27-02-T)

(SEE FIG12, SHT 3)

(ONLY AVAILABLE WITH -02 LEAD STYLE)

(NOT AVAILABLE WITH OPTIONS -A, -LC,

-RA, -SA, -WT, -RE1 OR -RE2)

SEE NOTE 12

.010 0.25 REF

-DS: DUAL SCREW DOWN FOR .062 BOARD

(SEE FIG 18, SHT 5)

.014 0.36 REF

MAX SWAY

"A"

"J" ± .003 [0.08]

(SEE TABLE 1, SHT 7)

(ONLY AVAILABLE WITH -01 & -02 LEAD STYLE)

(NOT AVAILABLE WITH OPTIONS -A, -LC, -P,

-RA, -TR, -SA, -K, -WT, -RE1, -RE2, -SN, -SN2)

(-01 LEAD STYLE USES TFM-XX-D-01-DSL

& T1-M2-4-VSFM-T, 02 LEAD STYLE USES

TFM-XX-D-01-DSA & T1-M2-4-VSFM-T)

.050 1.27

(EITHER DIRECTION)

MAX SWAY

(EITHER DIRECTION)

SECTION "A"-"A"

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

(No OF POSITIONS x .050[1.27]) - .050[1.27]

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

TOLERANCES ARE:

DECIMALS

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

ANGLES

"C"±.003 [0.08]

(SEE TABLE 1,

.XX: .01[0.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

FIG 1

.XXX: .005[0.13]

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

FAX: 812-948-5047

code 55322

.XXXX: .0020[0.051]

THROUGH HOLE

SHT 7)

-01, -03, -11, -13, -21, -23, -31

SHEET SCALE: 2.5:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

INSULATOR:

LCP, UL 94-VO

COLOR: BLACK

.050 X .050 TERMINAL STRIP

DWG. NO.

IN-PROCESS

TFM-1XX-XX-XXX-D-XXX

TERMINAL: PHOSPHOR BRONZE

F:\DWG\MISC\MKTG\TFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW

SHEET 1 OF

BY: garyp

11/5/2014

12 3 4 5 6 7

中文翻译

下载PDF

与TFM-105-01-L-D-WT相关器件

型号	品牌	获取价格	描述	数据表
TFM-105-01-LM-D-RE1-WT	SAMTEC	获取价格	Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
TFM-105-01-L-S-LC	SAMTEC	获取价格	Board Stacking Connector, 5 Contact(s), 1 Row(s), Male, Straight, 0.05 inch Pitch, Solder
TFM-105-01-P-D-A	SAMTEC	获取价格	Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
TFM-105-01-P-D-RA	SAMTEC	获取价格	Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
TFM-105-01-P-S-A	SAMTEC	获取价格	Board Stacking Connector
TFM-105-01-P-S-K	SAMTEC	获取价格	Board Stacking Connector
TFM-105-01-P-S-LC	SAMTEC	获取价格	Board Stacking Connector
TFM-105-01-S-D	SAMTEC	获取价格	Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-105-01-S-D-A	SAMTEC	获取价格	Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal
TFM-105-01-S-D-A-K	SAMTEC	获取价格	.050 X .050 MICRO STRIPS

与TFM-105-01-L-D-WT相关文章

摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
2024-09-18

21
贸泽上架Tallysman TW5386智能GNSS天线
2024-09-18

18
SL74HC10N：高性能三输入与非门解析
2024-09-03

95
AIC1781A 电池充电控制器深度解析
2024-09-03

86

产品中心

服务支持

精选活动

关于我们

帮助中心

TFM-105-01-L-D-WT

TFM-105-01-L-D-WT 技术参数

TFM-105-01-L-D-WT 数据手册

与TFM-105-01-L-D-WT相关器件

与TFM-105-01-L-D-WT相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TFM-105-01-L-D-WT

TFM-105-01-L-D-WT 技术参数

TFM-105-01-L-D-WT 数据手册

与TFM-105-01-L-D-WT相关器件

与TFM-105-01-L-D-WT相关文章

您还可以找

您在本页遇到什么问题？