TFF1044HN
ꢁ
ꢀ
$
*
/
9
Integrated mixer oscillator PLL for satellite quad LNB
+
Rev. 1 — 10 June 2015
Product data sheet
1. General description
The TFF1044HN is a 10.70 GHz to 12.75 GHz Ku band down converter for use in
universal quad and quattro Low Noise Block (LNB) in satellite receiver systems. The
device features two RF inputs (two polarizations) and four IF outputs (up to 4 active IF
paths). It integrates bias generation and control for the required external LNA stages,
image rejection filtering, LO generation, down-conversion mixers, IF amplifier stages,
voltage and tone detection on each IF output (for polarization and band selection) and the
4 (IF channels) 4 (2 polarizations, 2 bands) IF matrix switch. For flexibility, the gain can
be controlled in three discrete stages, the polarization of the RF inputs can be swapped
and the second stage LNA biasing control can be switched from pHEMT to BJT
configuration.
2. Features and benefits
Low current consumption integrated pre-amplifier, mixer, buffer amplifier and
PLL synthesizer
Integrated pHEMT/BJT bias control for external LNAs
Flat gain over frequency
Single 5 V supply pin
Operates with a low cost 25 MHz crystal
Crystal-controlled LO frequency generation, alignment free concept
Dual simultaneously operating LO frequencies (9.75 GHz and 10.6 GHz)
Adjustable step gain (30 dB, 33 dB and 36 dB)
Integrated switch matrix
Integrated voltage and tone detector
Low phase noise
Low spurious
Low external component count
Alignment-free concept
36-terminal leadless plastic thermally enhanced very thin profile land grid array
package 5.0 mm 5.0 mm 0.72 mm
3. Applications
Quad LNBs
Quattro LNBs
IP LNBs