NOTES:
1.
TFC-1XX-XX-XX-D-XX
REVISION AO
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM CONTACT RETENTION: 12 OZS.
OPTION
3. MINIMUM LOCKING CLIP RETENTION: 8 OZS.
4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[0.13].
5. MAXIMUM TERMINAL BURR: .003[0.08].
No OF POSITIONS
LEAD STYLE -01, -02: -02 THRU -50 (ALL
-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,
SEE TABLE 1, SHT 3) (SEE FIG 5, SHT 3)
(NOT AVAILABLE WITH -RA)
-LC: LOCKING CLIP (USE LC-05-TM)
(NOT AVAILABLE WITH -RA)
(SEE FIG 6, SHT 3, NOTE 3 & 11)
-P: PICK AND PLACE PAD (USE PPP-04)
(AVAILABLE IN ALL POSITIONS -05 THRU -50)
(NOT AVAILABLE WITH -RA)
(SEE FIG 7, SHT 3)
DO NOT
SCALE FROM
THIS PRINT
POSITIONS AVAILABLE)
6. COPLANARITY: .004[0.10] = POS 02 THRU 26
LEAD STYLES -11, -12: (-05 THRU -50 MULTIPLES OF 5)
POSITIONS -12, -16, -17 ALSO AVAILABLE
LEAD STYLES -21, -22: (-05 THRU -50 MULTIPLES OF 5)
POSITIONS -12 & -13 ALSO AVAILABLE
.006[0.15] = POS 27 THRU 50.
C
7. MEASURED FROM BEND.
8. MEASURE FROM TIPS OF PIN.
9. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01 & -02
WILL BE SOLID AND WITHOUT SIDE SLOTS.
LEAD STYLES -31, -32: (-05 THRU -50 MULTIPLES OF 5)
-12 POSITION ALSO AVAILABLE
10. THIS FEATURE ONLY PRESENT ON -01 & -02 LEAD STYLES.
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE
–LC OPTION.
-RA: RIGHT ANGLE
LEAD STYLE
(AVAILABLE ONLY IN LEAD STYLE: -01)
(SEE FIG 8, SHT 2)
THROUGH HOLE
-01 (SEE FIG 1)
-11 (SEE FIG 1)
-21 (SEE FIG 1)
-31 (SEE FIG 1)
SURFACE MOUNT
-02 (SEE FIG 2, SHT 2)
-12 (SEE FIG 2, SHT 2)
-22 (SEE FIG 2, SHT 2)
-32 (SEE FIG 2, SHT 2)
12. NOTE DELETED.
-TR: TAPE AND REEL (SEE FIG 4, SHT 4)
(FOR -X2 ONLY)
13. NOT ALL PARTS FOLLOW EIA-481 ORIENTATION IN THE T&R POCKET.
14. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED ACCORDING
TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM.
15. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, BASED ON OPTIONS SELECTED.
(NOT AVAILABLE WITH -RA)
(SEE NOTE 13 & 14)
-K: POLYIMIDE FILM (SEE FIG 3, SHT 2)
(ALL LEAD STYLES EXCEPT -21 AVAILABLE)
(NOT AVAILABLE FOR -RA)
(USE K-DOT-.217-.313-.005)
-FR: FULL REEL QTY. TAPE & REEL
(FOR -X2 ONLY)
(SEE TABLE 1, SHT 3)
(No. OF POSITIONS x .050[1.27]) + .125[3.18] REF
(No. OF POSITIONS x .050[1.27]) + .025[.64] REF
PLATING SPECIFICATION
-F: 3µ" FLASH GOLD ON CONTACT AREA,
(NOT AVAILABLE WITH -RA)
(SEE NOTE 13 & 15)
MATTE TIN TAIL
.110 2.79 REF
-L: 15µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
02
-LM: 15µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
.155 3.94
REF
BODY SPECIFICATION
-D: DOUBLE ROW
-FM: 3µ" FLASH GOLD ON CONTACT AREA,
MATTE TIN TAIL
01
.225 5.72
.050 1.27
REF
.135 3.43 REF
.075 1.91 REF
REF
SEE NOTE 10
C
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
.050 1.27
.018 0.46 REF
2
MAX SWAY
(EITHER DIRECTION)
"D" REF
(SEE TABLE 1,
SHT 3)
2
MAX SWAY
"A"
(EITHER DIRECTION)
.096 2.44
.1635 4.153
REF
"A" REF
(SEE TABLE 1,
SHT 3)
SEE NOTE 9
C
.010 0.25 REF
.014 0.36 REF
MAX SWAY
"F"±.003[0.08]
(SEE TABLE 1, SHT 3)
2
MAX SWAY
"A"
2
(EITHER DIRECTION)
(EITHER DIRECTION)
.050 1.27
C
C
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
SECTION "A"-"A"
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
FIG 1
C
DECIMALS
ANGLES
THROUGH HOLE
-01, -11, -21, -31
"C"±.003[0.08]
(SEE TABLE 1, SHT 3)
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR:
.050 X .050 TERMINAL STRIP
LCP, UL 94-V0
COLOR: BLACK
NO. TFC-1XX-XX-XX-D-XX
DWG.
IN-PROCESS
TERMINAL: PHOSPHOR BRONZE
F:\dwg\sw\exisprod\assembly\050\TFC-1XX-XX-XX-D-XX-ASM.SLDDRW
BY:
BRATCHER 05/25/2001 SHEET 1 OF 4
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
