COUNT
COUNT
CHKD
DESCRIPTION OF REVISIONS
CHKD DATE
DESCRIPTION OF REVISIONS
DATE
BY
BY
17. 11. 30
1
5
RE-5-1833
OCU
JDH
△
△
△
APPLICABLE STANDARD
OPERATING TEMPERATURE
RANGE
STORAGE TEMPERATURE
RANGE
-10℃ ~ +50℃(Packed Condition)
-55℃
~ +85℃
OPERATING OR STORAGE
HUMIDITY RANGE
Relative Humidity
90% MAX(NOT DEWED)
RATING
VOLTAGE
50V [AC(rms) / DC]
APPLICABLE
CABLE
FPC (t=0.2±0.03mm)
CURRENT
0.5A [AC(rms) / DC] (note1)
SPECIFICATIONS
TEST METHOD
ITEM
CONSTRUCTION
GENERAL EXAMINATION
REQUIREMENTS
QT AT
VISUALLY AND BY MEASURING INSTRUMENT
CONFIRMED VISUALLY
O
O
O
O
ACCORDING TO DRAWING
MARKING
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE
INSULATION RESISTANCE
VOLTAGE PROOF
MATE APPLICABLE FPC/FFC AND APPLY A CURRENT OF 100 mΩ MAX.
O
O
O
O
O
O
1mA DC(OR 1,000Hz)
INCLUDING FPC/FFC BULK RESISTANCE(L=8mm)
MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF 500 MΩ MIN.
DC 100V
MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF NO FLASHOVER OR BREAKDOWN.
AC 150V FOR 1 min.
MECHANICAL CHARACTERISTICS
FPC RETENTION FORCE
MECHANICAL OPERATION
VIBRATION
MEASURE BY APPLICABLE FPC/FFC(t=0.2)
①VERTICAL DIRECTION : 2.5 N MIN.
O
O
O
O
-
-
-
-
AT INITIAL CONDITION
②HORIZONTAL DIRECTION : 2.5 N MIN.
①CONTACT RESISTANCE: 100mΩ MAX
②NO DAMAGE,CRACK AND LOOSENESS OF PARTS
30 TIMES INSERTIONS AND EXTRACTIONS
FREQUENCY 10 ~ 55 Hz, TOTAL AMPLITUDE 1.5 mm
AT 2h, 3 TIMES , IN 3 DIRECTIONS
①NO ELECTRICAL DISCONTINUITY OF 1㎲.
②CONTACT RESISTANCE : 100mΩ MAX
③NO DAMAGE,CRACK AND LOOSENESS OF PARTS
981m/s2 DIRECTION OF PULSE 6ms AT 3 TIMES
IN 3 DIRECTIONS.
SHOCK
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT(STEADY STATE)
EXPOSED AT 40℃, 90~95 %, 96Hr.
①CONTACT RESISTANCE: 100 mΩ MAX.
②INSULATION RESISTANCE: 50 MΩ MIN.
③NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
O
O
-
-
RAPID CHAGE OF TEMPERATURE
TEMPERATURE : -55 → 15~35 → +85 → 15~35 ℃
TIME : 30 → 2~3 → 30 → 2~3 min.
5 CYCLES WITH ABOVE CONDITIONS.
TEMPERATURE -10→+65
DAMP HEAT, CYCLE
①CONTACT RESISTANCE: 100mΩ MAX.
②INSULATION RESISTANCE: 50 MΩ MIN.
③NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
①CONTACT RESISTANCE : 100mΩ MAX
②NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
①CONTACT RESISTANCE 100mΩ MAX
HUMIDITY : 90~95%
O
-
10 CYCLE(240Hr)
DRY HEAT
EXPOSED AT 85℃, 96Hr
O
O
-
-
COLD
EXPOSED AT -55℃, 96Hr
CORROSION SALT SPRAY
EXPOSED AT 35℃, 5 % SALT WATER SPRAY FOR 48Hr
O
O
-
-
②NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
③NO EVIDENCE OF CORROSISON WHICH AFFECTS
TO OPERATION OF CONNECTOR.
HYDROGEN SULPHIDE
EXPOSED IN 3 PPM FOR 96Hr.
(TEST STANDARD : JEIDA-38)
REFLOW SOLDERING:
RESISTANCE TO
①NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
SOLDERING HEAT
PROFILE : 217℃ 90~120s, 260℃ MAX.
O
O
-
-
②NO DAMAGE OF ELECTRICAL PERFORMANCE
A NEW UNIFORM COATING OF SLODER
SHALL COVER A MINIMUM OF 95% OF
SOLDER ABILITY
SOLDER DIPPING TEMPERATURE 245±5℃
(TEST STANDARD : MIL-STD-202)
3±0.3 SEC
THE SURFACE BEING EMMERSED.
(note 1)
WHEN THE SAME VALUE OF CURRENT ARE APPLIED TO ALL CONTACTS AT THE SAME TIME IN ONCE,
SET THE CURRENT TO THE 70% OF THE RATED CURRENT VALUE.
DRAWN
DESIGNED
CHECKED
APPROVED
REMARKS CONDITIONS FOR TESTING
RELEASED
ENG
(NOTE 1) : CHECK TEST
M.G.KANG M.G.KANG D.H.CHO H.C.SONG
15.06.05 15.06.05 15.06.05 15.06.05
18.12.06
DEPT
UNLESS OTHERWISE SPECIFIED, REFER TO JIS C 5402.
NOTE QT: QUALIFICATION TEST AT: ASSURANCE TEST O: APPLICABLE TEST
PART NO.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
TF12SD-10S-0.5SH(800)
CODE NO.(OLD)
DRAWING NO.
CODE NO.
1
CL
ELC4-631685-80
1
CL 6586-0019-6-800
F-1-021(Rev.0)
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
