73S1210F
Self-Contained Smart Card Reader
with PINpad and Power Management
Simplifying System Integration™
DATA SHEET
May 2009
In addition, the circuit features an ON/OFF mode which
operates directly with an ON/OFF system switch: Any
activity on the ON/OFF button is debounced internally
and controls the power generation circuit accordingly,
under the supervision of the firmware (OFF request /
OFF acknowledgement at firmware level). The OFF
mode can be alternatively initiated from the controller
(firmware action instead of ON/OFF switch).
GENERAL DESCRIPTION
The 73S1210F is a versatile and economical CMOS
System-on-Chip device intended for smart card reader
applications. The circuit is built around an 80515 high-
performance core; it features primarily an ISO-7816 / EMV
interface and a generic asynchronous serial interface.
Delivered with turnkey Teridian embedded firmware, it
forms a ready-to-use smart card reader solution that can be
seamlessly incorporated into any microprocessor-based
system where a serial line is available.
In OFF mode, the circuit typically draws less than 1µA,
which makes it ideal for applications where battery life
must be maximized.
The solution is scalable, thanks to a built-in I2C interface
that allows to drive external electrical smart card interfaces
such as Teridian 73S8010 ICs. This makes the solution
immediately able to support multi-card slots or multi-SAM
architectures.
Embedded Flash memory is in-system programmable
and lockable by means of on-silicon fuses. This makes
the 73S1210F suitable for both development and
production phases.
In addition, the 73S1210 features a 5x6 PINpad interface, 8
user I/Os, multiple interrupt options and an analog voltage
input (for DC voltage monitoring such as battery level
detection) that make it suitable for low-cost PINpad reader
devices.
Teridian Semiconductor Corporation offers with its
73S1210F a very comprehensive set of software
libraries for EMV. Refer to the 73S12xxF Software
User’s Guide for a complete description of the
Application Programming Interface (API Libraries) and
related software modules.
The 80515 CPU core instruction set is compatible with the
industry standard 8051, while offering one clock-cycle per
instruction processing power (most instructions). With a
CPU clock running up to 24MHz, it results in up to 24MIPS
available that meets the requirements of various encryption
needs such as AES, DES / 3-DES and even RSA (for PIN
encryption for instance).
A complete array of development and programming
tools, libraries and demonstration boards enable rapid
development and certification of readers that meet
most demanding smart card standards.
APPLICATIONS
The circuit requires a single 6MHz to 12MHz crystal.
•
PINpad smart card readers:
o
o
With serial connectivity
Ideal for low-cost POS Terminals and Digital
Identification (Secure Login, Gov’t ID, ...)
The respective 73S1210F embedded memories are 32KB
Flash program memory, 2KB user XRAM memory, and
256B IRAM memory. Dedicated FIFOs for the ISO 7816
UART are independent from the user XRAM and IRAM.
•
•
•
SIM Readers in Personal Wireless devices
Payphones & Vending machines
General purpose smart card readers
Alternatively to the turnkey firmware offered by Teridian,
customers can develop their own embedded firmware
directly within their application or using Teridian 73S1210F
Evaluation Board through a JTAG-like interface.
ADVANTAGES
•
•
Reduced BOM
Versatile power supply options
o
2.7V to 6.5V ranges
The chip incorporates an inductor-based DC-DC converter
that generates all the necessary voltages to the various
73S1210F function blocks (smart card interface, digital
core, etc.) from any of two distinct power supply sources:
•
•
•
Higher performance CPU core (up to 24MIPS)
Built-in EMV/ISO slot, expandable to multi-slots
Flexible power supply options
o
o
On-chip DC-DC converter
CMOS switches between supply inputs
the +5V bus (VBUS, 4.4 to 6.5V), or a main battery (VBAT
,
4.0V to 6.5V). The chip automatically powers-up the DC-
DC converter with VBUS if it is present, or uses VBAT as the
supply input if VBUS is not present. Alternatively, the pin VPC
can support a wider power supply input range (2.7V to
6.5V), when using a single system supply source.
•
•
•
•
Sub-µA Power Down mode with ON/OFF switch
Powerful In-Circuit Emulation and Programming
A complete set of EMV4.1 / ISO7816 libraries
Turnkey PC/SC firmware and host drivers
o
Multiple OS supported
Rev. 1.4
© 2009 Teridian Semiconductor Corporation
1
5秒后页面跳转
MAX487芯片引脚图及功能、应用领域详解
IR2110驱动芯片引脚图及功能、电路图详解
74LS74是什么芯片 74LS74引脚图及功能表
CD4511芯片引脚图及功能、电路图解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
