TEL-2A20
VCSEL for general purpose
FEATURES:
• Epoxy molded with round emission surface.
• Ceramic heat sink.
• Low dependence of power output over temperature.
• Miniature, easy for mounting.
• Driving current between 8 to 15 mA.
• Symmetrical beam.
ELECTRO-OPTICAL CHARACTERISTICS:
TEST CONDITIONS(1)
PARAMETERS
Threshold Current
Output Power
SYMBOL
MIN
TYP
MAX
10
4
UNIT
mA
mW
Ith
Po
5
2
1
IF =15 mA(2)
Adjustable to establish
1.5 mW output power
Operating Current
IOP
12
mA
Slope Efficiency
Wavelength
Forward Voltage
Breakdown voltage
Series Resistance
0.20
850
2.2
15
40
7
mW/mA IF=15 mA(3)
h
l P
VF
VBD
RS
q
820
2
10
870
2.5
nm
V
V
W
degree
IF=15 mA
IF=15 mA
IR=10 mA
IF =15 mA
IF=15 mA(4)
Beam Divergence
Notes:
1. All parameters except mentioned are measured at IF=15 mA, 25°C, CW.
2. Higher power can be provided under request.
3. Slope efficiency is defined as DP/(15-Ith) at 25°C.
4. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM).
THERMAL CHARACTERISTICS:
PARAMETERS
Thermal Resistance
Ith Temperature Variation
VF Temperature Coefficient
h Temperature Coefficient
l P Temperature Coefficient
SYMBOL
MIN
TYP
900
MAX
UNIT
°C /W
mA
mV/°C
%/°C
nm/°C
TEST CONDITIONS
TA=25°C
TA=0~70°C
TA=0~70°C, IF=15 mA
TA=0~70°C, IF=15 mA
TA=0~70°C, IF=15 mA
Rth
DIth
DVF/DT
Dh/DT
Dl P/DT
-1.5
1.5
-3.0
-0.25
0.07
ABSOLUTE MAXIMUM RATINGS:
PARAMETERS
MIN
MAX
UNIT
CONDITIONS
Storage Temperature
Operating Temperature
Lead Solder Temperature
Continuous Forward Current
Continuous Reverse Voltage
-40
-20
100
85
260
40
°C
°C
°C
mA
V
5 seconds
10