TEA18361LT/2
GreenChip SMPS control IC
Rev. 1 — 21 November 2022
Product data sheet
1 General description
The TEA18361LT is a controller IC for low-cost switched-mode power supplies (SMPS).
It is intended for flyback topologies. The built-in green functions provide high efficiency at
all power levels.
At high power levels, the flyback operates in quasi-resonant (QR) mode. At lower power
levels, the controller switches to frequency reduction (FR) or discontinuous conduction
mode (DCM) and limits the peak current to approximately 25 % of the maximum peak
current. Valley switching is used in all operating modes.
At low power levels, when the flyback switching frequency drops below 25 kHz, the
flyback converter switches to burst mode. A special burst mode has been integrated
which reduces the optocurrent to a minimum level, ensuring high efficiency at low power
and excellent no load power performance. As the switching frequency in this mode has a
minimum value of 25 kHz while the burst frequency is below 800 Hz, the frequencies are
outside the audible range. During the non-switching phase of the burst mode, the internal
IC supply current is minimized for further efficiency optimization.
The TEA18361LT includes an accurate overpower protection (OPP). The OPP enables
the controller to operate in overpower situations for a limited amount of time. If the output
is shorted, the system switches to low-power mode where the output power is limited to a
lower level.
The TEA18361LT is manufactured in a high-voltage silicon-on-insulator (SOI) process.
The SOI process combines the advantages of a low-voltage process (accuracy, high-
speed protection, functions, and control), while maintaining the high-voltage capabilities
(high-voltage start-up, low standby power, and an integrated X-capacitor discharge
function).
The TEA18361LT enables low-cost, highly efficient, and reliable supplies for power
requirements up to 75 W to be designed with a minimum number of external
components.
All values mentioned in this data sheet are typical values, unless otherwise specified.
2 Features and benefits
2.1 General features
• SMPS controller IC for low-cost applications
• Large supply voltage range (up to 30 V)
• Integrated high-voltage start-up
• Continuous VCC regulation during start-up and protection via the HV pin, allowing a
minimum VCC capacitor value
• Reduced optocurrent in burst mode enabling low no load power consumption
• Operating frequencies in all operating modes are outside the audible area