TDA9882
Alignment-free multistandard vision and QSS FM sound
IF PLL demodulator
Rev. 01 — 16 November 2004
Product data sheet
1. General description
The TDA9882 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and
sound IF signal PLL demodulator for positive and negative modulation, including Quasi
Split Sound (QSS) FM and AM sound processing.
2. Features
■ 5 V supply voltage
■ Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled
■ Multistandard true synchronous demodulation with active carrier regeneration: very
linear demodulation, good intermodulation figures, reduced harmonics and excellent
pulse response
■ Gated phase detector for L and L-accent standard
■ Fully integrated VIF Voltage Controlled Oscillator (VCO), alignment-free, frequencies
switchable via logic pin VIF0 and pin QSSO with resistor for negative and positive
modulated standards
■ Digital acquisition help circuit, VIF frequencies of 38.9 MHz and 45.75 MHz (negative
modulation); 38.9 MHz and 33.9 MHz (positive modulation)
■ 4 MHz reference frequency input signal from Phase-Locked Loop (PLL) tuning system
or operating as crystal oscillator
■ VIF Automatic Gain Control (AGC) detector for gain control; operating as peak sync
detector for negative modulated signals and as a peak white detector for positive
modulated signals
■ VIF AGC monitor output at pin VAGC
■ Precise fully digital Automatic Frequency Control (AFC) detector with 4-bit
digital-to-analog converter
■ TakeOver Point (TOP) adjustable with potentiometer
■ Fully integrated sound carrier trap for 4.5 MHz, 5.5 MHz, 6.0 MHz and 6.5 MHz;
controlled by FM PLL oscillator
■ Sound IF (SIF) input for single reference Quasi Split Sound (QSS) mode; PLL
controlled
■ SIF AGC for gain controlled SIF amplifier; single reference QSS mixer able to operate
in high performance single reference QSS mode
■ AM sound demodulator without extra reference circuit
■ Alignment-free selective FM PLL demodulator with high linearity and low noise.