TDA38826
TDA38826
20 A synchronous Buck regulator
Features
Wide Input Voltage Range: 4 V to 16 V with internal bias and 2.7 V to 16 V with external VCC (3.3 V)
Precision Reference Voltage (0.9 V +/- 0.5%)
Stable with Ceramic Output Capacitors
No External Compensation
Optional Forced Continuous Conduction Mode and Diode Emulation for Enhanced Light Load Efficiency
Selectable Switching Frequency from 600 kHz, 800 kHz, and 1 MHz
Programmable Soft-Start Time with a minimum of 1.5 ms & Enhanced Pre-Bias Start-Up
Voltage Tracking with External Reference Input
Programmable Over Current Protection Limit with internal thermal compensation
Enable input with Voltage Monitoring Capability
Power Good Output
Latch-Off OCP, UVP, Thermal Shutdown, and OVP
Operating Temp: -40 °C < Tj < 125 °C
Small Size: 3 mm x 4 mm QFN-21
Lead-free, Halogen-free and RoHS Compliant
Potential applications
Server Applications
Storage Applications
Telecom & Datacom Applications
Distributed Point of Load Power Architectures
Product validation
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22
Description
The TDA38826 is a 20 A fully integrated and highly efficient dc - dc Buck regulator. It uses a fast Constant On-Time
(COT) control scheme, which simplifies the design efforts and achieves fast transient response while maintaining
excellent line and load regulation. It can operate over a wide range of input voltage (2.7 V to 16 V) using an
external bias supply.
TDA38826 is a versatile regulator, offering switching frequency selectable from 600 kHz, 800 kHz and 1 MHz,
programmable current limit and soft-start time with a minimum of 1.5 ms, Forced Continuous Conduction Mode
(FCCM) and Diode Emulation Mode (DEM) operation. The TDA38826 supports voltage tracking with an external
reference input. It also features important protection functions, such as pre-bias start-up, thermally
compensated current limit, over voltage and under voltage protection, and thermal shutdown to give required
system level security in the event of fault conditions. The TDA38826 is available in a standard QFN-21 (3mm x
4mm) package and is able to operate over a wide temperature range (-40 °C < Tj < 125 °C).
Final Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 38
V 2.0
2023-07-06