TC78H670FTG
TOSHIBA CD process Integrated Circuit Silicon Monolithic
TC78H670FTG
Clock-in and Serial controlled Bipolar Stepping Motor Driver
1. Outline
The TC78H670FTG is a two-phase bipolar stepping motor driver using a PWM
chopper which incorporate DMOS with low on-resistance in output
transistors. The clock-in decoder is built in.
P-VQFN16-0303-0.50-001
Weight: 22.9 mg (typ.)
2. Features
•
•
•
•
•
•
•
•
Built-in Dual H Bridges, Capable of controlling 1 bipolar stepping motor
PWM controlled constant-current drive
Power supply operating voltage: 2.5 V to 16.0 V
Output current ratings: 2.0 A (max)
Low on-resistance (High + Low side = 0.48 Ω (typ.)) MOSFET output stage
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation
Built-in Sense resistor less current control architecture (Advanced Current Detection System)
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), motor load open (OPD)
and Under voltage lockout(UVLO))
•
•
•
•
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistor
Small QFN package with thermal pad (16pin)
Note: Please be careful about thermal conditions during using.
Note: It is possible to detect OPD only when Serial mode is selected.
Start of commercial production
2020-01
© 2019-2021
Toshiba Electronic Devices & Storage Corporation
1
2021-02-09