TC78B016FTG
TOSHIBA CMOS Integrated Circuit Silicon Monolithic
TC78B016FTG
3-Phase Sine-Wave PWM Driver for Brushless DC Motors
This product is a three-phase sine-wave PWM driver for brushless
motors. It controls motor rotation speed by changing the PWM
duty cycle, based on the speed control input. Hall signal is
supported to three sensor.
P-WQFN36-0505-0.50-001
Weight: 0.06 g (typ.)
Features
•
Built-in Auto lead angle architecture (InPAC:Intelligent
Phase Control)
•
•
•
•
•
•
Three-phase full wave drive
Sine-wave PWM drive
Hall amplifier (hall element / hall IC)
Power supply: absolute maximum voltage: 40 V
Output current: absolute maximum current: 3 A
Selectable rotational speed command input signal:
Pulse duty signal input/ analog voltage input
Selectable PWM frequency
•
•
•
•
Adjustable minimum duty in PWM control
Adjustable speed ratio in PWM control
Selectable lead angle control function:
Auto lead angle function (proportion to frequency /phase control)
External lead angle control (32 steps correspond to 0° to 58°)
Selectable rotation direction
•
•
•
•
•
Brake function terminal
Selectable lock detection function
Restart function
Rotation frequency signal (FG_OUT):
1 pulse/ electrical angle 360°, 3 pulses/ electrical angle 360°
Lock detection signal (LD_OUT)
•
•
•
•
•
•
•
Power supply voltage monitoring function
Overcurrent detection circuit (ISD)
Thermal shutdown circuit (TSD)
Under voltage lockout circuit (UVLO)
Current limit circuit: external sensing resistor
Adjustable start conditions
1
2017-11-21
© 2016 - 2017
Toshiba Electronic Devices & Storage Corporation