TC7734FTG
TOSHIBA CMOS Integrated Circuit Silicon Monolithic
TC7734FTG
Power Management System IC
1. DESCRIPTION
TC7734FTG is a complete power supply solution for portable
devices that include 4 DCDC Buck Converters, 3 LDOs, 2-ch LED
Driver and built-in Switching Charger function. Most of the outputs
can be controlled by I2C bus for various programmable settings.
2. FEATURES
• Operating voltage: 3.4 V to 5.5 V
• 4 ch DCDC converter (DCDC1 to DCDC4)
. Synchronous Current Mode Buck Converters
. DCDC1-4 Optional 2-Phase Switching Reduces Input Peak
Current
. Built-in compensation circuit: DCDC1 to DCDC4
• 3 ch LDO(LDO1 to LDO3)
P-VQFN64-0909-0.50-001
Weight: 0.192 g (typ.)
• LED Driver
. Built-in Current Mode DCDC Boost Converter
. 2-Ch Constant Current LED Driver
. Sink Current: up to 80 mA/ch with LED voltage up to 20 V
. Output Current Accuracy: +/- 5% (ILED = 20 mA)
. LED1 and LED2 Regulation Voltage: 0.4 V
. PWM dimming, I2C Controlled 32 steps with 195Hz fixed dimming frequency
. LED Driver Protection Circuit
Over Voltage Detection (OVD)
Output Open Detection (OOD)
Output Short Detection (OSD)
• Battery Charger Function
. USB Host and USB Charger Adaptor Detections for Optimum Charge Current for SDP, CDP, DCP and Other)
. DCIN Input Over Voltage Protection (OVP): 5.8 V (typ.) * Maximum voltage of DCIN terminal is defined by 6 V.
. Power Path Function
. 1.5 A Switching Charger with Built-in Power MOSFETs
Output Descriptions:
Output
DCDC1
DCDC2
DCDC3
DCDC4
LDO1
Adj Vout (V)
0.9 - 1.4
1.05 - 1.95
2.7 - 3.4
1.5 - 3.3
1.2 – 1.9
Step (V)
Default (V)
1.0
Default Options (V) 1
Iout (A)
1500 mA
1000 mA
800 mA
500 mA
300 mA
Control
I2C
50m
150m
100m
-
0.9 - 1.4 V@50 mV
1.05 - 1.95 V@150 mV
2.7 – 3.4 V@100 mV
R_ext
1.2,1.3,1.4,1.5, 1.6,
1.7, 1.8, 1.9
1.35
3.3
(1.8)
1.8
I2C
I2C
R_ext
-
I2C
LDO2
1.5 – 2.8
100m
2.8
1.5, 1.6, 1.7, 1.8, 2.3,
2.5, 2.8
350 mA
I2C
LDO3
Output
LEDD
1.5 - 3.3
Adj PWM
32 steps
-
(1.8)
Vout (V)
20
R_ext
Default Iout
20 mA x 2
120 mA
fPWM (Hz)
195
R_ext
Control
I2C
Iout
80 mA x2
• I2C Control for Various Parameters
• 1MHz Switching Frequencies DCDC1 to DCDC4
• 1MHz Switching Frequencies LED Driver, and Switching Charger
• PFM/PWM Operation for Wide Range of Load Current
• Built-in Soft start Circuit
• Programmable Power Sequence
• Interrupt for Event Notifications
• Power-good (PG) Notification
• DCDC and LDO Over Current Limit Circuits (OCL)
• Global Protection: Thermal Shutdown (TSD), VDD Under Voltage Lock Out (VUVLO), DCIN Under Voltage Lock Out (DUVLO)
• Register Password Protection
• Package: P-VQFN64-0909-0.50-001 9 mm × 9 mm × 0.7 mm (0.5 mm pin pitch)
• Application: Tablet PC, Portable Devices
Note 1: PFM does not apply to DCDC3
© 2015 TOSHIBA Corporation
1
2015-6-5