5秒后页面跳转
TC500AIOG713 PDF预览

TC500AIOG713

更新时间: 2024-09-24 03:18:23
品牌 Logo 应用领域
美国微芯 - MICROCHIP /
页数 文件大小 规格书
34页 635K
描述
Precision Analog Front Ends

TC500AIOG713 数据手册

 浏览型号TC500AIOG713的Datasheet PDF文件第2页浏览型号TC500AIOG713的Datasheet PDF文件第3页浏览型号TC500AIOG713的Datasheet PDF文件第4页浏览型号TC500AIOG713的Datasheet PDF文件第5页浏览型号TC500AIOG713的Datasheet PDF文件第6页浏览型号TC500AIOG713的Datasheet PDF文件第7页 
TC500/A/510/514  
Precision Analog Front Ends  
Features:  
General Description:  
• Precision (up to 17 bits) A/D Converter “Front  
End”  
TheTC500/A/510/514 family are precision analog front  
ends that implement dual slope A/D converters having  
a maximum resolution of 17 bits plus sign. As a  
minimum, each device contains the integrator, zero  
crossing comparator and processor interface logic. The  
TC500 is the base (16-bit max) device and requires  
both positive and negative power supplies. The  
TC500A is identical to the TC500 with the exception  
that it has improved linearity, allowing it to operate to a  
maximum resolution of 17 bits. The TC510 adds an on-  
board negative power supply converter for single-  
supply operation. The TC514 adds both a negative  
power supply converter and a 4-input differential  
analog multiplexer.  
• 3-Pin Control Interface to Microprocessor  
• Flexible: User Can Trade-off Conversion Speed  
for Resolution  
• Single-Supply Operation (TC510/TC514)  
• 4 Input, Differential Analog MUX (TC514)  
• Automatic Input Voltage Polarity Detection  
• Low Power Dissipation:  
- (TC500/TC500A): 10 mW  
- (TC510/TC514): 18 mW  
• Wide Analog Input Range:  
- ±4.2V (TC500A/TC510)  
Each device has the same processor control interface  
consisting of 3 wires: control inputs (A and B) and zero-  
crossing comparator output (CMPTR). The processor  
manipulates A, B to sequence the TC5XX through four  
phases of conversion: auto-zero, integrate, de-inte-  
grate and integrator zero. During the auto-zero phase,  
offset voltages in the TC5XX are corrected by a closed  
loop feedback mechanism. The input voltage is applied  
to the integrator during the integrate phase. This  
causes an integrator output dv/dt directly proportional  
to the magnitude of the input voltage. The higher the  
input voltage, the greater the magnitude of the voltage  
stored on the integrator during this phase. At the start  
of the de-integrate phase, an external voltage  
reference is applied to the integrator and, at the same  
time, the external host processor starts its on-board  
timer. The processor maintains this state until a  
transition occurs on the CMPTR output, at which time  
the processor halts its timer. The resulting timer count  
is the converted analog data. Integrator zero (the final  
phase of conversion) removes any residue remaining  
in the integrator in preparation for the next conversion.  
• Directly Accepts Bipolar and Differential  
Input Signals  
Applications:  
• Precision Analog Signal Processor  
• Precision Sensor Interface  
• High Accuracy DC Measurements  
The TC500/A/510/514 offer high resolution (up to 17  
bits), superior 50/60 Hz noise rejection, low-power  
operation, minimum I/O connections, low input bias  
currents and lower cost compared to other converter  
technologies having similar conversion speeds.  
© 2006 Microchip Technology Inc.  
DS21428D-page 1  

与TC500AIOG713相关器件

型号 品牌 获取价格 描述 数据表
TC500AIOI MICROCHIP

获取价格

Precision Analog Front Ends with Dual Slope ADC
TC500AIOI713 MICROCHIP

获取价格

Precision Analog Front Ends with Dual Slope ADC
TC500AIOIOI713 MICROCHIP

获取价格

Precision Analog Front Ends
TC500AIPE MICROCHIP

获取价格

Precision Analog Front Ends
TC500AIPF MICROCHIP

获取价格

Precision Analog Front Ends
TC500AIPJ MICROCHIP

获取价格

Precision Analog Front Ends
TC500CJE MICROCHIP

获取价格

Precision Analog Front Ends with Dual Slope ADC
TC500COE TELCOM

获取价格

PRECISION ANALOG FRONT ENDS
TC500COE MICROCHIP

获取价格

Precision Analog Front Ends
TC500COE713 MICROCHIP

获取价格

Precision Analog Front Ends with Dual Slope ADC