TB67S103AFTG/FNG
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB67S103AFTG, TB67S103AFNG
Serial-in controlled Bipolar Stepping Motor Driver
FTG
The TB67S103A is a two-phase bipolar stepping motor driver
using a PWM chopper. The data bank setting function by serial
control I/F is built in.Fabricated with the BiCD process,
rating is 50 V/4.0 A .
Features
P-WQFN48-0707-0.50-003
Weight 0.10g (typ.)
・BiCD process integrated monolithic IC.
・Capable of controlling 1 bipolar stepping motor.
・PWM controlled constant-current drive.
・Allows full, half, quarter, 1/8, 1/16, 1/32 step operation.
・ID (2 bits) setup is possible.
FNG
・Low on-resistance (High + Low side=0.49Ω(typ)) MOSFET
output stage.
・High efficiency motor current control mechanism (Advanced
Dynamic Mixed Decay)
・High voltage and current (For specification, please refer to absolute
maximum ratings and operation ranges)
HTSSOP48-P-300-0.50
Weight 0.21g (typ.)
・Error detection (TSD/ISD) signal output function
・Built-in error detection circuits (Thermal shutdown (TSD)、over-current
shutdown (ISD), and power-on reset (POR))
・Built-in VCC regulator for internal circuit use.
・Chopping frequency of a motor can be customized by external resistance
and condenser.
・Multi package lineup
TB67S103AFTG: P-WQFN48-0707-0.50-003
TB67S103AFNG: HTSSOP48-P-300-0.50
Note) Please be careful about thermal conditions during use.
2014-01-27
1