TAS5612A
www.ti.com
SLAS710 –JUNE 2010
125W STEREO / 250W MONO PurePath™ HD DIGITAL-INPUT POWER STAGE
Check for Samples: TAS5612A
1
FEATURES
APPLICATIONS
•
•
•
•
•
Home Theater Systems
AV Receivers
DVD/Blu-ray™ Disc Receivers
Mini Combo Systems
Active Speakers and Subwoofers
23
•
PurePath™ HD Enabled Integrated Feedback
Provides:
–
Signal Bandwidth up to 80kHz for High
Frequency Content From HD Sources
–
–
–
Ultralow 0.03% THD at 1W into 4Ω
Ultralow 0.01% THD at 1W into 8Ω
DESCRIPTION
Flat THD at all Frequencies for Natural
Sound
The TAS5612A is a high performance digital input
Class
D amplifier with integrated closed loop
–
–
–
80dB PSRR (BTL, No Input Signal)
>100dB (A weighted) SNR
feedback technology (known as PurePath™ HD) with
the ability to drive up to 125W Stereo into 4 to 8 Ω
Speakers from a single 32.5V supply.
(1)
Click and Pop Free Startup
•
•
Pin compatible with TAS5631, TAS5616 and
TAS5614
PurePath™ HD technology enables traditional
AB-Amplifier performance (<0.03% THD) levels while
providing the power efficiency of traditional class D
amplifiers.
Multiple Configurations Possible on the Same
PCB With Stuffing Options:
–
–
–
Mono Parallel Bridge Tied Load (PBTL)
Stereo Bridge Tied Load (BTL)
Unlike traditional Class D amplifiers, the distortion
curve only increases once the output levels move into
clipping. PurePath™ HD Power PAD™
2.1 Single Ended Stereo Pair and Bridge
Tied Load Subwoofer
PurePath™ HD technology enables lower idle losses
making the device even more efficient.
•
•
Total Output Power at 10%THD+N
TOTAL HARMONIC DISTORTION+NOISE
VS
OUTPUT POWER
–
–
250W in Mono PBTL Configuration
125W per Channel in Stereo BTL
Configuration
10
4Ohm (6kHz)
4Ohm (1kHz)
Total Output Power in BTL configuration at
1%THD+N
1
–
–
–
–
130W Stereo into 3Ω
105W Stereo into 4Ω
70W Stereo into 6Ω
55W Stereo into 8Ω
0,1
0,01
•
•
>90% Efficient Power Stage With 60-mΩ
Output MOSFETs
TC = 75 C
CONFIG = BTL
0,001
0,01
Self-Protection Design (Including
Undervoltage, Overtemperature, Clipping, and
Short-Circuit Protection) With Error Reporting
1
100
PO - Output Power - W
•
•
EMI Compliant When Used With
Recommended System Design
(1) Achievable output power levels are dependent on the thermal
configuration of the target application. A high performance
thermal interface material between the package exposed
heatslug and the heat sink should be used to achieve high
output power levels.
Two Thermally Enhanced Package Options:
–
–
PHD (64-Pin QFP)
DKD (44-Pin PSOP3)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PurePath, Power PAD are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated