TAS3208
DIGITAL AUDIO PROCESSOR WITH ANALOG INTERFACE
www.ti.com
SLES201A–JANUARY 2007–REVISED FEBRUARY 2007
FEATURES
–
–
–
–
135-MHz Operation
•
Audio Input/Output
48-Bit Data Path With 76-Bit Accumulator
Hardware Single Cycle Multiplier (28 × 48)
–
–
–
Three Synchronous Serial Audio Inputs
(Six Channels)
Two Memory Loads and One Memory Store
Per Cycle
Two Synchronous Serial Audio Outputs
(Four Channels)
–
Usable 768 Data RAM Words (48 Bit),
Usable 1K Coefficient RAM (28 Bit)
Input and Output Data Formats: 16-, 20-, or
24-Bit Data Left, Right, and I2S
–
–
Usable 2.5K Program RAM
–
–
–
SPDIF Transmitter
360 mS @ 48KHz, 17280 Words 24-Bit
Delay Memory for Video Sync
64 × Fs Bit Clock Rate
512 × Fs XTAL Input for Master-Mode
•
System Control Processor
Clock Rates
–
–
Embedded 8051 WARP Microprocessor
–
–
256 × Fs MCLKIN for Slave-Mode Clock
Rates
Programmable Using Standard 8051 C
Compilers
Ten Multiplexed Stereo Analog Inputs
Selectable Into One Stereo ADC and Three
Stereo Line Outputs
–
–
16K Words of Program RAM (8 Bit)
Programmable Using Standard 8051 C
Compilers
–
High-Quality 93 dB DNR (Typical) ADC
Channel Performance (Two Channels)
–
–
–
2048 Words of Data RAM (8 Bit)
256 Words of Internal RAM (8 Bit)
Programmable Functionality
–
A Single Ended Analog Stereo Line
Driver Output With 1 of 11 Selectable
Inputs, 10-kΩ, 100-pF Drive Capability
(Typical Output Level: 1-V RMS)
•
General Features
–
–
Easy to Use Control Interface
I2C Serial Control Master and Slave
–
Three Stereo Audio DACs
Interface
–
High-Quality 96-dB DNR (Typical) DAC
Channel Performance (Six Channels)
–
Control Interface Operational Without
External MCLK Input
–
Stereo Headphone Amplifier – 24 mW
Power Output Into 16 Ω, 100 pF
–
–
–
Single 3.3-V Power Supply
Integrated Regulators
100-Pin TQFP Package
•
Audio Digital Signal Processor
Programmable Functionality
–
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated