TAS2505A-Q1
SLASFD7 – APRIL 2024
TAS2505A-Q1 2.6W Digital/Analog Input Automotive Class-D Speaker Amplifier With
Audio Processing
1 Features
3 Description
•
AEC-Q100 Qualified with the following results for
automotive applications:
The TAS2505A-Q1 is a mono Class-D speaker amp
that supports both Digital and Analog inputs. The
device is designed for automotive instrument cluster,
emergency call (eCall), and telematics applications.
Direct I2S input removes the need for an external
DAC in the audio signal path, and the integrated
LDO enables single supply operation. In addition to
integration, the device features programmable audio
processing. The onboard DSP supports bass boost,
treble, and EQ (up to 6 biquads). An on-chip PLL
provides the high-speed clock needed by the DSP.
The volume level is register controlled.
– Device temperature grade 2: –40°C to 105°C
ambient operating temperature range
– Device HBM ESD classification level H2
– Device CDM ESD classification level C4B
Mono class-D BTL speaker amplifier
– 2.6W at 10% THD_N (4Ω, 5.5V)
– 1.7W at 10% THD+N (8Ω, 5.5V)
Supports both digital and analog input
Single supply 2.7V to 5.5V
•
•
•
•
Load diagnostic functions:
Device Information(1)
– Output-to-GND Short
– Terminal-to-terminal short
– Output-to-power short
PART NUMBER
TAS2505A-Q1
TAS2505-Q1
PACKAGE
VQFN (24)
VQFN (24)
PACKAGE SIZE(2)
4.00mm × 4.00mm
4.00mm × 4.00mm
– Over temperature
•
•
Supports 9kHz to 96kHz sample rates
Two single-ended inputs with output mixing and
level control
Embedded power-on-reset
Programmable digital audio processing:
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) The package size (length × width) is a nominal value and
includes pins, where applicable.
•
•
– Bass boost
– Treble
AINR
0
dB to -78 dB and Mute
(Min 0.5 dB steps)
AINL
0
dB to -78 dB
and Mute
(Min 0.5 dB steps)
6
dB to +24 dB
(6 dB steps)
– EQ (up to 6 biquads)
SPKP
SPKM
Dig
Vol
Mono S-D
DAC
DAC Signal Proc.
S
•
I2S, Left-justified, right-justified, DSP, and TDM
audio interfaces
•
•
I2C and SPI Control With Auto-Increment
24-Pin, VQFN wettable flank (automotive grade)
package
POR
LDO
LDO_SEL
SPKVDD
2 Applications
AVDD
DVDD
IOVDD
PLL
Interrupt
Control
SPI/I2
Control Block
C
Secondary I2
Interface
S
Primary I2
Interface
S
SPI_SEL
RST
•
•
•
Instrument Cluster
Automotive Emergency Call (eCall)
Telematics
SPKVSS
AVSS
Pin Muxing
/
Clock Routing
DVSS
MISO
Simplified Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.