T96
Vishay Sprague
www.vishay.com
Solid Tantalum Chip Capacitors TANTAMOUNT™,
Hi-Rel COTS, Low ESR, Built-in-Fuse, Conformal Coated Case
FEATURES
• High reliability design with reliability screening
available
Available
• Surge current testing per MIL-PRF-55365
options available
Available
• Standard and low ESR options
• Terminations: SnPb, standard. 100 ꢀ tin available
• Circuit protection for mission or safety critical systems
• Fuse characteristics: guaranteed fuse protection at 9 A,
100 ms
• Mounting: surface mount
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40209
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 10 μF to 680 μF
Capacitance Tolerance: 20 ꢀ, 10 ꢀ standard
Voltage Rating: 4 VDC to 50 VDC
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
ORDERING INFORMATION
T96
R
107
K
010
E
S
A
S
TYPE CASE
CODE
CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION AND RELIABILITY
SURGE
CURRENT
ESR
PACKAGING
LEVEL
See
Ratings
and
Case
Codes
Table.
This is
K = 10 ꢀ
M = 20 ꢀ
This is expressed in
volts. To complete
the three-digit
block, zeros
precede the
voltage rating. A
decimal point is
indicated by an “R”
(6R3 = 6.3 V)
E: Sn / Pb solder /
7" (178 mm) reels
L: Sn / Pb solder /
7" (178 mm) ½ reel
C: 100 ꢀ tin /
7" (178 mm) reels
H: 100 ꢀ tin /
S = 40 h
burn-in
Z = non-
established at -55 °C / +85 °C
reliability
A = 10 cycles
at +25 °C
B = 10 cycles
S = std
L = low
expressed in
picofarads. The
first two digits
are the
S = 3 cycles
at +25 °C
significant
figures. The third
is the number of
zeros to follow.
7" (178 mm) ½ reel
Note
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting
DIMENSIONS in inches [millimeters]
Tantalum wire
Nib indentifies
Anode (+) terminal
J
f
H
H1
W
W
CASE CODE
L (MAX.)
W
H1
H
F (REF.)
D (REF.)
J (MAX.)
0.295
[7.5]
0.243 + 0.012 / - 0.024
[6.2 + 0.3 / - 0.6]
0.156 0.012
[4.0 0.3]
0.146 0.012
[3.7 0.3]
0.079
[2.0]
0.248
[6.3]
0.004
[0.1]
R
Note
The anode termination (D less B) will be a minimum of 0.010" (0.25 mm)
•
Revision: 22-Jun-17
Document Number: 40118
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000