T6L34C
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
T6L34C
SOURCE DRIVER FOR TFT LCD PANELS
The T6L34C is a 256−gray−level, 384−channel−output source
driver for TFT LCD panels. The device accepts 8 bit × 6 dot
digital data inputs, for which the direction of data transfer can be
selected by the U / D pin. The 12 (6 × 2) reference voltage input
pins combined with the internal D / A converter materializes
multicolor display in up to 16,700,000 colors.
Since the T6L34C supports a dot line inversion system, it
eliminates the need for inversion of the LCD panel’s counter
electrode, allowing for high picture quality.
Moreover, its output dynamic range is a large 12.6 Vp−p (max).
Based on high−speed CMOS, the T6L34C offers both low power
consumption and high−speed operation. To configure an SXGA or
XGA−compatible TFT LCD module, it allows a maximum
operating frequency of 37.5 MHz.
Features
ꢀ Grayscale data
ꢀ Panel drive outputs
ꢀ Fast operation
: Digital CMOS−level 48−bit (8 bits × 6 outputs) parallel transfer method, selectable
transfer direction
: 384 outputs, 256 gray levels, R−DAC system, 12 (6 × 2) reference analog voltage
inputs, dot / line inversion drive
: Max 37.5 MHz
･
ꢀ Power supply voltage
: Digital power supply voltage .......... 3.0 to 3.6 V
Analog power supply voltage .......... 7.5 to 13.0 V
ꢀ Operating temperature
: −20 to 75°C
ꢀ Cascading of multiple devices
ꢀ Package : Tape carrier package (TCP)
000707EBE1
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
• Polyimide base film is hard and thin. Be careful not to injure yourself on the film or to scratch any other parts with the film. Try to
design and manufacture products so that there is no chance of users touching the film after assembly, or if they do , that there is no
chance of them injuring themselves. When cutting out the film, try to ensure that the film shavings do not cause accidents. After use,
treat the leftover film and reel spacers as industrial waste.
• Light striking a semiconductor device generates electromotive force due to photoelectric effects. In some cases this can cause the
device to malfunction.
This is especially true for devices in which the surface (back), or side of the chip is exposed. When designing circuits, make sure
that devices are protected against incident light from external sources. Exposure to light both during regular operation and during
inspection must be taken into account.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
• The information contained herein is subject to change without notice.
2001-02-13 1/20
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
