Active Single channel Analog signal
Isolation barrier (Vin & Vout)
T55/56/65/66_B
APPLICATIONS
PRODUCT PROGRAM
Analog signal isolating barrier, is
a signal
Part
Number
Isolation
Power Output
Power Supply
Input
Output
Channels
conditioner with electrical insulation between
input and output, which can receive the standard
or non-standard analog signal input from the
scene, and transmit a standard output signal to
the control room or DCS, to get three-port
isolated among power supply, input and output. It
is designed for translating signals of apparatus in
hazardous area, isolating and transforming these
signals into standard signals which can be
accepted by industry computer, DCS, PLC, or
user-specified special signals. It is widely used in
the industrial measurement systems, medical
electronic equipment, electrical equipment etc.
We adopt high efficiency magnetism and
electricity isolated technology to achieve signal
isolation, with characteristics of high output
accuracy, good linearity and low temperature drift.
T6630B
T5630B
T5533B
T5530B
1
1
1
1
24V
24V
24V
24V
0-5V
0-10V
0-10V
0-10V
0-5V
0-5V
NONE
NONE
24V
0-10V
0-10V
NONE
Note: We could also offer customer design for special input and output.
ELECTRICAL CHARACTERISTICS
Power Supply
Power Dissipation
Power Protection
Output Voltage
Output Current
Input Signal
(Nominal Power Supply)±5%
Power Supply
Data
≤2W
Reverse protection
(Nominal)±10%
≤25mA
Isolation Power
Output Data
See above
≥10MΩ
Input Data
Input Impedance
Overload
≤15V
Output Signal
Load
See above
Output Data
>1KΩ(At Output = MAX)
FEATURES
● Three port Isolation(input, output, power supply)
● High accuracy (0.1% F.S.)
TRANSMISSION CHARACTERISTICS
● High linearity (0.1% F.S.)
Offset
0.1%F.S.
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Low temperature drift(35PPM/℃)
● Industry class(Operation temp.: -25℃ to +71℃)
● High reliability(MTBF>500,000 hours)
Gain Error
Temperature Drift
0.1%F.S.
0.0035%F.S./℃ (-25℃ to +71℃)
ISOLATION CHARACTERISTICS
Galvanic Isolation
Three port Isolation(input, output, power supply)
Isolation Voltage
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
Insulation
Resistance
100MΩ,500VDC(Among signal input ,signal output, power supply
and isolation power output)
MODEL SELECTION
TXXXXB
OTHER CHARACTERISTICS
Package style
Isolation power output
Power supply
Output
Input
Isolation amplifier
Operation temperature:-25℃ to +71℃
Ambient
temperature
Transport and Storage temperature:-50℃ to +105℃
35mm DIN-rail package
Package
Safety Class
EMC compliance
Weight
IP20(IEC60529 / EN60529)
GB/T 18268(IEC61326-1)
About 60g
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Application
environment
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Tel: 86-20-38601850
Fax:86-20-38601272
Note:
1 .All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output
load unless otherwise specified.
Http://www.mornsun-power.com
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T55/56/65/66_B A/1-2008 Page 1 of 2