ACTIVE SIGNAL AMPLIFIER Vin&Iout
T51/52/61/62_D/S
DESCRIPTION
The series is
PRODUCT PROGRAM
a
high integration, high
– line active isolation
Part
Isolation
Power Output
Power Supply
Number
Input
Output
Channels
efficiency polygonal
T5150D/S
T5230D/S
T6130D/S
T6135D/S
T6230D/S
T6233D/S
T6235D/S
T6250D/S
T6253D/S
T6255D/S
12V
24V
24V
24V
24V
24V
24V
12V
12V
12V
0-10V
0-10V
0-5V
0-5V
0-5V
0-5V
0-5V
0-5V
0-5V
0-5V
4-20mA
0-20mA
4-20mA
4-20mA
0-20mA
0-20mA
0-20mA
0-20mA
0-20mA
0-20mA
NONE
NONE
NONE
12V
1
1
1
1
1
1
1
1
1
1
amplifier module, with anterior circuit voltage
signal input and posterior current signal output.
These modules are embed with
a high
efficiency isolated micro-power source, which
can provide a electrics-feed for signal input. In
the two-wire three-wire and four-wire circuit
applications, our products largely predigest
customers’ design helpfully improve the using
room ratio of PCB .Adopting electromagnetism
isolation technology, it is available to keep high
NONE
24V
12V
NONE
24V
accuracy
and
natural
extremely
low
12V
temperature drift. The isolation voltage among
the input, output power supply and isolated
power output can up to 2.5KVDC.
Note: We could also offer customer design for special input and output.
ELECTRICAL CHARACTERISTICS
Power Supply
Power Dissipation
Power Protection
Output Voltage
Output Current
Input Signal
(Nominal Power Supply)±5%
≤2W
Power Supply Data
Reverse protection
(Nominal) ±10%
≤25mA
FEATURES
● Three-port isolation(Among input, output and
Isolation Power
Output Data
power supply)
See above
● High accuracy (0.1% F.S.)
Input Data
● High linearity (0.1% F.S.)
Input Impedance
Overload
≥10MΩ
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Extremely low temperature(35PPM/℃)
● Industry standard(Operating Temperature
Range:-25°C to 71°C)
≤30V
Output Signal
Load
See above
Output Data
≤500Ω(At output=20mA)
TRANSMISSION CHARACTERISTICS
● High reliability(MTBF>500,000 hours)
Offset
0.1%F.S.
Gain Error
Temperature Drift
0.1%F.S.
0.0035%F.S./℃ (-25℃ to +71 ℃)
MODEL SELECTION
TXXXXD
ISOLATION CHARACTERISTICS
Galvanic Isolation
Three-port isolation(Among input, output and power supply)
Isolation Voltage
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
Package style
Isolation power output
Power supply
Output
Insulation
Resistance
1000MΩ, 500VDC (Among signal input, signal output and power
supply)
Input
Isolation Amplifier
OTHER CHARACTERISTICS
Operation temperature:-25℃ to +71℃
Ambient
temperature
Transport and Storage temperature:-50℃ to +105℃
Package
Weight
DIP24/SOIC24
About 10g
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
The Environment
in use
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
Tel: 86-20-38601850
Note:
Fax:86-20-38601272
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
Http://www.mornsun-power.com
2. Only typical models listed, specifications of custom product may be different. Please contact our service
people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T51/52/61/62_D/S A/3-2008 Page 1 of 2