ACTIVE SIGNAL AMPLIFIER Iin & Vout
T15/16/25/26_D/S
DESCRIPTION
PRODUCT PROGRAM
The series is
a
high integration, high
- line active isolation
Part
Isolation
Power Output
Power Supply
Number
Input
Output
Channels
efficiency polygonal
amplifier module, with anterior circuit current
signal input and posterior current signal output.
T1530D/S
T1533D/S
T1630D/S
T1650D/S
24V
24V
24V
12V
4-20mA
4-20mA
4-20mA
4-20mA
0-10V
0-10V
0-5V
NONE
24V
1
1
1
1
These modules are embed with
a high
NONE
NONE
efficiency isolated micro-power source, which
can provide a electrics-feed for signal input. In
the two-wire three-wire and four-wire circuit
applications, our products largely predigest
customers’ design helpfully improve the using
room ratio of PCB. Adopting electromagnetism
isolation technology, it is available to keep high
0-5V
Note: We could also offer customer design for special input and output.
ELECTRICAL CHARACTERISTICS
Power Supply
Power Supply ±5%
accuracy
and
natural
extremely
low
temperature drift. The isolation voltage among
the input, output, power supply and isolated
power output can up to 2.5KVDC.
Power Supply Data
Power Dissipation
Power Protection
Output Voltage
Output Current
≤2W
Reverse protection
(Nominal) ±10%
≤25mA
Isolation Power
Output Data
Input Signal
See above
Input Impedance
Input Data
Voltage Drop≤250mV(At input=20mA)
≤300mA
FEATURES
● Four-port isolation(Among input, output,
power supply and Isolation Power output)
● High accuracy (0.1% F.S.)
Overload
Output Signal
Load
See above
Output Data
>1KΩ(At output=max)
● High linearity (0.1% F.S.)
● Isolation voltage(2500VDC/60S)
● High frequency response(15KHz)
● Extremely low temperature(35PPM/℃)
● Industry standard(Operating Temperature
Range:-25°C to 71°C)
TRANSMISSION CHARACTERISTICS
Offset
0.1%F.S.
Gain Error
Temperature Drift
0.1%F.S.
0.0035%F.S./℃ (-25℃ to +71 ℃)
● High reliability(MTBF>500,000 hours)
ISOLATION CHARACTERISTICS
Four-port isolation(Among input, output, power supply and Isolation
Power output)
Galvanic Isolation
Isolation Voltage
MODEL SELECTION
2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%)
TXXXXD
Insulation
1000MΩ,500VDC (Among signal input ,signal output ,power supply
Resistance
and isolation power output)
Package style
Isolation power output
Power supply
Output
OTHER CHARACTERISTICS
Input
Isolation Amplifier
Operation temperature:-25℃ to +71℃
Ambient
temperature
Transport and Storage temperature:-50℃ to +105℃
Package
Weight
DIP24/SOIC24
About 10g
The Environment
in use
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T15/16/25/26_D/S A/2-2008 Page 1 of 2