Precision Edge®
SY58023U
ULTRA-LOW JITTER 2 × 2 CROSSPOINT
SWITCH w/CML OUTPUTS AND
INTERNAL I/O TERMINATION
Micrel, Inc.
®
Precision Edge
SY58023U
FEATURES
■ Guaranteed AC performance over temperature and
®
Precision Edge
voltage:
• >10.7Gbps data throughput
DESCRIPTION
• <60ps t /t times
r f
• <285ps t (IN-to-Q)
pd
The SY58023U is a 2.5V/3.3V precision, high-speed, fully
differential CML 2 × 2 crosspoint switch. The SY58023U is
optimized to provide two identical output copies with less
than 20ps of skew and ultra-low jitter. It can route clock
signals as fast as 6GHz or data up to 10.7Gbps.
• <20ps skew
■ Low jitter:
• <10ps total jitter (clock)
pp
• <1ps
random jitter (data)
rms
The differential input includes Micrel’s unique, 3-pin input
termination architecture that allows the SY58023U to directly
interface to LVPECL, LVDS, and CML differential signals
• <10ps deterministic jitter (data)
pp
■ Crosstalk induced jitter: <0.7ps
rms
(AC- or DC-coupled) as small as 100mV (200mV ) without
■ Accepts an input signal as low as 100mV
pp
any level-shifting or termination resistor networks in the signal
path. The CML outputs features 400mV typical swing into
50Ω loads, and provide an extremely fast rise/fall time
guaranteed to be less than 60ps.
■ Unique input termination and V pin accepts DC-
T
coupled and AC-coupled differential inputs:
LVPECL, LVDS, and CML
■ 50Ω source terminated CML outputs
■ Fully differential inputs/outputs
The SY58023U operates from a +2.5V ±5% supply or
+3.3V ±10% supply and is guaranteed over the full industrial
temperature range (–40°C to +85°C). For applications that
require high speed dual CML switches, consider the
SY58024U. The SY58023U is part of Micrel’s high-speed,
■ Power supply 2.5V ±5% and 3.3V ±10%
■ Industrial –40°C to +85°C temperature range
®
■ Available in 16-pin (3mm × 3mm) MLF package
®
Precision Edge product line.
Datasheets and support documentation can be found on
Micrel’s website at www.micrel.com.
FUNCTIONAL BLOCK DIAGRAM
APPLICATIONS
■ Gigabit Ethernet data/clock routing
■ SONET data/clocking routing
■ Switch fabric clock routing
■ Redundant switchover
SEL0
(TTL/CMOS)
0
IN0
VT0
Q0
50Ω
50Ω
■ Backplane redundancy
/Q0
1
/IN0
SEL1
(TTL/CMOS)
IN1
VT1
0
1
Q1
50Ω
50Ω
/Q1
/IN1
Precision Edge is a registered trademark of Micrel , Inc.
MicroLeadFrame and MLF are registered trademarks of Amkor Technology, Inc.
Rev.: F
Amendment: /0
M9999-020207
hbwhelp@micrel.com or (408) 955-1690
1
Issue Date: February 2007