SY100EP16V
3.3V/5V Precision ECL Differential
Receiver/Driver
General Description
Precision Edge®
The SY100EP16V is a 3.3/5V, high-speed, fully
differential ECL Receiver/Driver that can process
clock signals as fast as 3GHz or data patterns up to
2.5Gbps.
Features
• Precision 800mV ECL Receiver/Driver
• 100K ECL compatible I/O
• Guaranteed AC performance over temperature and
The differential input includes an internal 75kΩ pull-
down resistor on both the true and complement inputs
and a 37.5kΩ pull-up resistor in the complement input
only. For AC-coupled input interface applications, an
integrated voltage reference (VBB) is provided to bias
for either single-ended use or for DC biasing when AC
coupling to the device. The VBB pin should be used
only as a bias for the SY100EP16V since its current
sink/source capability is limited. Whenever used, the
VBB pin should be bypassed to the most positive
supply voltage. The output is 800mV ECL, with fast
rise/fall times guaranteed to be less than 200ps.
voltage:
– DC-to > 2.5Gbps throughput
– 220ps typical propagation delay (D-to-Q)
– <200ps rise/fall times
• PECL and NECL operation capability
• PECL operating range: VCC = 3.0V to 5.5V with
VEE = 0V
• NECL operating range: VCC = 0V with VEE = -3.0V to
-5.5V
When the inputs are left open, the internal input
clamps will force the Q output low.
• 3.3V ±10% or 5.0V ±10% power supply operation
• Industrial temperature range: –40°C to +85°C
The SY100EP16V operates from a 3.3V or 5V ±10%
supply and is guaranteed over the full industrial
• Available in 8-pin (2mm x 2mm) MLF®, 8-pin MSOP,
and 8-pin SOIC packages
temperature
range
(–40°C
to
+85°C).The
SY100EP16V is part of Micrel’s high-speed, Precision
Edge® product line.
Applications
• All SONET clock and data distribution
• Fibre Channel clock and data distribution
• Gigabit Ethernet clock and data distribution
• Backplane distribution
Datasheets and support documentation can be found
on Micrel’s web site at: www.micrel.com.
Functional Block Diagram
Markets
• Storage
• ATE
• Test and measurement
• Enterprise networking equipment
• High-end servers
• Access
• Metro area network equipment
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-121808-A
hbwhelp@micrel.com or (408) 955-1690
December 2008