ENHANCED
DIFFERENTIAL
RECEIVER
SY10EL16VA-VF
SY100EL16VA-VF
FINAL
FEATURES
DESCRIPTION
■ 3.3V and 5V power supply options
■ 250ps propagation delay
The SY10/100EL16VA-VF are differential receivers.
The devices are equivalent to SY10/100EL16 or SY10/
100EL16V with enhanced capabilities. The QHG, /QHG
outputs have a DC gain several times larger than the DC
gain of the Q output.
The SY10/100EL16VA have an identical pinout to the
SY10/100EL16 or SY10/100EL16V. It provides a VBB
output for either single-ended application or as a DC
bias for AC coupling to the device.
■ Very high voltage gain vs. standard EL16 or EL16V
■ Ideal for Pulse Amplifier and Limiting Amplifier
applications
■ Data synchronous Enable/Disable (/EN) on QHG and
/QHG provides for complete glitchless gating of the
outputs
The SY10/100EL16VB are very similar to the SY10/
100EL16VA. The /Q output is provided for feedback
purposes.
■ Ideal for gating timing signals
■ Complete solution for high quality, high frequency
crystal oscillator applications
The SY10/100EL16VC provides an /EN input which is
synchronized with the data input (D) signal in a way that
providesglitchlessgatingoftheQHG and/QHG outputs. When
the /EN signal is LOW, the input is passed to the outputs and
the data output equals the data input. When the data input is
HIGH and the /EN goes HIGH, it will force the QHG LOW and
the /QHG HIGH on the next negative transition of the data
input. If the data input is LOW when the /EN goes HIGH, the
next data transition to a HIGH is ignored and QHG remains
LOW and /QHG remains HIGH. The next positive transition of
thedatainputisnotpassedontothedataoutputsunderthese
conditions. The QHG and /QHG outputs remain in their dis-
abled state as long as the /EN input is held HIGH. The /EN
input has no influence on the /Q output and the data input is
passed on (inverted) to this output whether /EN is HIGH or
LOW. This configuration is ideal for crystal oscillator applica-
tions, where the oscillator can be free running and gated on
and off synchronously without adding extra counts to the
output.
■ Internal 75K Ohm input pull-down resistors
■ Available in both 8 and 16-pin SOIC package; 8 and
10-pin (3mm) MSOP and in DIE form
PIN NAMES
Pin
D
Function
Data Inputs
Q
Data Outputs
QHG
VBB
/EN
Data Outputs w/High Gain
Reference Voltage Output
Enable Input
The SY10/100EL16VD provides the flexibility of all the
combinations in DIE form, in 16-pin 150mil SOIC package or
in10-pinMSOPpackage. The16-pinSOICand10-pinMSOP
packages are ideal for prototyping DIE applications.
TheSY10/100EL16VEaresimilar totheSY10/100EL16VB
where the Q, /Q output is made available differently. In this
package option, VBB is no longer provided.
TRUTH TABLE
/EN
0
QHG Output
Data
TheSY10/100EL16VFaresimilar totheSY10/100EL16VC,
offering the D, /D inputs rather than the VBB output.
1
Logic Low
Rev.: M
Amendment:/0
Issue Date: February 2003
1