SWG75 SERIES
DC/AC single output ring generator
• Provides 75VA of ringer output power
• Typical efficiency 78%
• Short circuit protection
• Operating temperature up to 70°C
• Internal sine wave reference
• Remote ON/OFF control
• Opto-isolated cadencing ON/OFF control
• Peak output DC biased current capability
• Stand-offs for optional heatsink mounting
The SWG75 ring current generator series of DC/AC inverters offer 75VA of
output power with industry standard footprints and configurations. The design
is specifically tailored for PABX system applications to ensure ease of
implementation in customer applications. These special features include
cadencing output ON/OFF, peak output DC biased current capability at off-hook
transition.
[ 2 YEAR WARRANTY ]
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
GENERAL SPECIFICATIONS
OUTPUT SPECIFICATIONS
Nominal voltage
75VAC
±3.0V
±2.0%
±2.0%
75Ω
Efficiency
Resistive load
75% typ.
Voltage accuracy
Load regulation
Line regulation
Load impedance
No load
Isolation voltage
Input/output
Input/remote control
500VDC
500VDC
NL to FL resistive
Isolation resistance
Switching frequency
Case material
Input/output
Fixed
1GΩ
Low line to high line
Resistive load (See Note 1)
90kHz, typical
Capacitive load (See Note 1) 82 bells
Aluminium with plastic
non-conductive base
Output frequency
25Hz ±2Hz
2.2A
Material flammability
Weight
UL94V-0
Maximum output current
(Including heatsink)
450g (15.8oz)
100,000 hours
Output ripple and noise Switching to 20MHz
Output ripple frequency Full load
5V pk-pk
180kHz, nominal
5.0% max.
MTBF
MIL-HDBK-217F
@ 25°C nominal
input voltage
Total harmonic
distortion
Resistive load
ENVIRONMENTAL SPECIFICATIONS
Output current
DC offset
1.0A
Thermal performance
Operating temperature
See curve
–40°C to +85°C
10% to 95% RH
(ambient)
±2V max.
Non-operating
INPUT SPECIFICATIONS
Input voltage range
Input current
Relative humidity
Altitude
Non-condensing
48VDC nominal
36 to 60VDC
3A max. @ 36VDC
Pi network
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Input filter
Vibration
5Hz to 500Hz
2.4G rms (approx.)
Input undervoltage
(output clipped)
48VDC input model
34VDC max.
Reference input
impedance
Internal sine-wave
reference oscillator
Remote ON/OFF
Logic compatibility
(See Note 4)
Opto-isolated
control inputs
<100ms and start
from positive going
zero crossing
Response time
PAGE 1 7 6