S/GRA/SW5xxxxx/A/31/03/2004
page 1 /3 F/GB
VARIATEUR MONOPHASE A COMMANDE
PROPORTIONNELLE 0 - 10V
SWG5
/ ONE PHASE CONTROLLER WITH
PROPORTIONAL CONTROL 0 - 10V
2kW et 8kW sous 230VAC
Ces variateurs de la gamme SG5 celduc, montés sur dissipateur, possèdent une entrée analogique isolée du secteur permettant de
faire varier proportionnellement à cette entrée, le rapport cyclique de fonctionnement d'une résistance de chauffage.
La commande est synchrone au réseau et ne comporte que des périodes entières .
Principales caractéristiques :
- Tension de réseau : 230V 50 ou 60Hz (400V sur demande)
- Entrée analogique : 0 à 10 V (4 à 20 mA, 0 à 5V ou potentiomètrique sur demande)
This range of controllers has an analog input isolated from the mains, provided to vary the cyclic working ratio of a load proportionally
to the input.The control is synchronous with the mains and has only full periods. Mains characteristics:
- Main voltage : 230V 50 or 60hz (400V on request)
- Analog input : 0 to 10 V (4 to 20 mA , 0 to 5V or potentiometer on request)
OUTPUT
Puissance
OUTPUT
Puissance
REFERENCE
CONTROL
0-10V
REFERENCE
CONTROL
0-10V
VOLTAGE
charge/Load
VOLTAGE
charge/Load
SWG50210 230VAC
2KWatts
SWG50810 230VAC
8KWatts
SG5
WF121100
SG5
L= 100mm h = 74mm p = 56mm
L= 100mm h = 110mm p = 96mm
Proud to serve you
celduc
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
r e l a i s