5秒后页面跳转
STPM14 PDF预览

STPM14

更新时间: 2024-11-28 04:01:43
品牌 Logo 应用领域
意法半导体 - STMICROELECTRONICS 脉冲
页数 文件大小 规格书
43页 919K
描述
Single phase energy metering IC with pulsed output and digital calibration

STPM14 数据手册

 浏览型号STPM14的Datasheet PDF文件第2页浏览型号STPM14的Datasheet PDF文件第3页浏览型号STPM14的Datasheet PDF文件第4页浏览型号STPM14的Datasheet PDF文件第5页浏览型号STPM14的Datasheet PDF文件第6页浏览型号STPM14的Datasheet PDF文件第7页 
STPM11/12/13/14  
Single phase energy metering IC with pulsed output  
and digital calibration  
Feature summary  
Ripple free active energy pulsed output  
Direct stepper counter drivers  
Shunt, current transformer, Rogowsky coil  
sensors  
Live and neutral monitoring (STPM13/14)  
TSSOP20  
Easy and fast digital calibration at only one  
load point  
voltage reference, low drop voltage regulator. The  
digital part is composed of a system control,  
oscillator, hard wired DSP and interface for  
calibration and configuration.  
No-load, negative power and tamper indicators  
Integrated linear VREGS  
RC (STPM11/13) or crystal oscillator  
(STPM12/14)  
The calibration and configuration are done by  
OTP cells, that can be programmed through a  
serial interface. The configured bits are used for  
testing, configuration and calibration purposes.  
From two ∑∆ output signals coming from the  
analog section, a DSP unit computes the amount  
of consumed active energy. The active energy is  
available as a pulse frequency output and directly  
driven by a stepper counter. In the STPM1X an  
output signal with pulse frequency proportional to  
energy is generated. This signal is used in the  
calibration phase of the energy meter application  
allowing a very easy approach. When the device  
is fully configured and calibrated, a dedicated bit  
of OTP block can be written permanently in order  
to prevent accidental entry into test mode or  
changing any configuration bit.  
Support 50÷60 HZ - IEC62052-11, IEC62053-  
2X specification  
Less than 0.1% error  
Description  
The STPM1x family is designed for effective  
measurement of active energy in a power line  
system using a Rogowski Coil, Current  
Transformer and Shunt sensors. This device is  
specifically designed to provide all the necessary  
features to implement a single phase energy  
meter without any other active component. The  
STPM1x device family consists, essentially, of two  
parts: the analog part and the digital part. The  
former, is composed of a preamplifier and first  
order ∑∆ A/D converter blocks, band gap  
Order code  
Part number  
Package  
TSSOP20 (Tape & reel)  
Packaging  
STPM11ATR  
STPM12ATR  
STPM13ATR  
STPM14ATR  
2500 parts per reel  
2500 parts per reel  
2500 parts per reel  
2500 parts per reel  
TSSOP20 (Tape & reel)  
TSSOP20 (Tape & reel)  
TSSOP20 (Tape & reel)  
March 2007  
Rev. 3  
1/43  
www.st.com  
43  

与STPM14相关器件

型号 品牌 获取价格 描述 数据表
STPM14ATR STMICROELECTRONICS

获取价格

Single phase energy metering IC with pulsed output and digital calibration
STPM32 STMICROELECTRONICS

获取价格

用于计量应用的ASSP,具有最多4个独立的24位2阶∑Δ ADC、4 MHz OSF和2个
STPM33 STMICROELECTRONICS

获取价格

用于计量应用的ASSP,具有最多4个独立的24位2阶∑Δ ADC、4 MHz OSF和2个
STPM34 STMICROELECTRONICS

获取价格

用于计量应用的ASSP,具有最多4个独立的24位2阶∑Δ ADC、4 MHz OSF和2个
STPM801 STMICROELECTRONICS

获取价格

高压热插拔、软启动和Oring
STPMC1 STMICROELECTRONICS

获取价格

Programmable poly-phase energy calculator IC
STPMC1BTR STMICROELECTRONICS

获取价格

Programmable poly-phase energy calculator IC
STPMIC02 STMICROELECTRONICS

获取价格

电源管理IC、2个电子熔断器和2开关稳压器
STPMIC06 STMICROELECTRONICS

获取价格

电源管理IC:4个降压调节器,PMBUS? 接口
STPMIC07M STMICROELECTRONICS

获取价格

Power Management IC: 4 Buck regulators, 3 LDO, I2C Interface