STM8S005K6 STM8S005C6
Value line, 16 MHz STM8S 8-bit MCU, 32 Kbytes Flash, data
EEPROM,10-bit ADC, timers, UART, SPI, I²C
Permanently active, low consumption power-on
and power-down reset
•
Interrupt management
Nested interrupt controller with 32 interrupts
•
Up to 37 external interrupts on 6 vectors
•
LQFP48 7x7
LQFP32 7x7
Timers
2x 16-bit general purpose timers, with 2+3
CAPCOM channels (IC, OC or PWM)
•
•
Advanced control timer: 16-bit, 4 CAPCOM
channels, 3 complementary outputs, dead-time
insertion and flexible synchronization
Features
Core
8-bit basic timer with 8-bit prescaler
•
Auto wake-up timer
•
16 MHz advanced STM8 core with Harvard
architecture and 3-stage pipeline
•
•
Window and independent watchdog timers
•
Extended instruction set
Communications interfaces
UART with clock output for synchronous
operation, Smartcard, IrDA, LIN
•
Memories
Medium-density Flash/EEPROM:
•
SPI interface up to 8 Mbit/s
I2C interface up to 400 Kbit/s
•
Program memory: 32 Kbytes of Flash
memory; data retention 20 years at 55°C
after 100 cycles
-
•
Analog-to-digital converter (ADC)
Data memory: 128 bytes of true data
EEPROM; endurance up to 100 k write/erase
cycles
-
10-bit, ±1 LSB ADC with up to 10 multiplexed
channels, scan mode and analog watchdog
•
RAM: 2 Kbytes
I/Os
•
Up to 38 I/Os on a 48-pin package including 16
high sink outputs
•
•
Clock, reset and supply management
2.95 V to 5.5 V operating voltage
•
Highly robust I/O design, immune against current
injection
Flexible clock control, 4 master clock sources:
•
Low power crystal resonator oscillator
-
Development support
External clock input
-
Embedded single wire interface module (SWIM)
for fast on-chip programming and non intrusive
debugging
•
Internal, user-trimmable 16 MHz RC
-
Internal low power 128 kHz RC
-
Clock security system with clock monitor
•
Power management:
•
Low power modes (wait, active-halt, halt)
-
Switch-off peripheral clocks individually
-
June 2012
1/103
DocID022186 Rev 3
www.st.com