ST
Sitronix
ST7546T
66 x 102 Dot Matrix LCD Controller/Driver
1. INTRODUCTION
The ST7546T is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 102 segment
and 65 common with 1 ICON driver circuits. This chip is connected directly to a microprocessor, accepts 8-bit parallel
interface、3-line or 4-line serial peripheral interface (SPI)、I2C interface, display data can stores in an on-chip display
data RAM of 66 x 102 bits. It performs display data RAM read/write operation with no external operating clock to
minimize power consumption. In addition, because it contains power supply circuits to drive liquid crystal, it is possible
to make a display system with the fewest components.
2. FEATURES
Single-chip LCD controller & driver
-
Oscillator requires no external components
(external clock also possible)
Voltage converter (x4, x5)
Voltage regulator(temperature gradient
-0.11%/°C)
Driver Output Circuits
102 segment / 65 common + 1 ICON
On-chip Display Data ram
-
-
-
Capacity: 66X102=6,732 bits
Microprocessor Interface
-
-
Voltage follower
-
-
8-bit parallel bi-directional interface with
On-chip electronic contrast control function (255
steps)
6800-series or 8080-series
4-line SPI (serial peripheral interface) available
(only write operation)
External RESB (reset) pin
Logic supply voltage range VDD1,2 -VSS
-
-
3-line SPI (serial peripheral interface) available
I2C (Inter-Integrated Circuit) Interface
-
-
VDD1 -VSS : 1.7 to 3.3V
VDD2 -VSS : 2.4 to 3.3V
On-chip Low Power Analog Circuit
Display supply voltage range VLCD -VSS
4.5 to 13.5V
Temperature range: -40 to +85 degree
-
Generation of LCD supply voltage (externally
Vout voltage supply is possible)
-
-
Generation of intermediate LCD bias voltages
6800 , 8080 ,
ST7546T-G2
ST7546Ti-G2
4-Line , 3-Line interface
(without I2C interface)
I2C interface
Ver 1.2
1/48
2006/01/26