ST
Sitronix
ST7032
Dot Matrix LCD Controller/Driver
n Features
l
l
5 x 8 dot matrix possible
Low power operation support:
-- 2.7 to 5.5V
Range of LCD driver power
-- 3.0 to 7.0V
4-bit, 8-bit, serial MPU or 400kbits/s fast
I2C-bus interface are available
80 x 8-bit display RAM (80 characters max.)
10,240-bit character generator ROM for a
total of 256 character fonts(max)
64 x 8-bit character generator RAM(max)
16-common x 80-segment and 1-common x
80-segment ICON liquid crystal display
driver
l
l
Wide range of instruction functions:
Display clear, cursor home, display on/off,
cursor on/off, display character blink, cursor
shift, display shift, double height font
Automatic reset circuit that initializes the
controller/driver after power on and external
reset pin
Internal oscillator(Frequency=540KHz) and
external clock
Built-in voltage booster and follower circuit
(low power consumption )
l
l
l
l
l
l
l
l
l
l
l
Com/Seg direction selectable
Multi-selectable for CGRAM/CGROM size
Instruction compatible to ST7066U and
KS0066U and HD44780
l
16 x 5 –bit ICON RAM(max)
l
Available in COG type
n Description
The ST7032 dot-matrix liquid crystal display controller can
display alphanumeric, Japanese kana characters, and
symbols. It can be configured to drive a dot-matrix liquid
crystal display under the control of a 4 / 8-bit with
6800-series or 8080-series, 3/4-line serial interface
microprocessor. Since all the functions such as display
RAM, character generator ROM/RAM and liquid crystal
driver, required for driving a dot-matrix liquid crystal display
are internally provided on one chip, a minimal system can
be used with this controller/driver.
The ST7032 is suitable for low voltage supply (2.7V to
5.5V) and is perfectly suitable for any portable product
which is driven by the battery and requires low power
consumption.
The ST7032 LCD driver consists of 17 common signal
drivers and 80 segment signal drivers. The maximum
display RAM size can be either 80 characters in 1-line
display or 40 characters in 2-line display. A single ST7032
can display up to one 16-character line or two 16-character
lines.
The ST7032 character generator ROM size is 256 5x8dot
bits which can be used to generate 256 different character
fonts (5x8dot).
The ST7032 dot-matrix LCD driver does not need extra
cascaded drivers.
n Product Number
ST7032 supports various function for customer. Please specify correct product number for application:
For example, “ST7032–0D” the first part is illustrated below and the second part is the identification code of the built-in
character generation ROM. Please refer to the appendix for the character generation ROM code information.
6800-4bit / 8bit, 4-Line interface
(without IIC interface)
ST7032
ST7032i
IIC interface
Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice.
V1.4
2008/08/18
1/61