1350POWERINDUCTORS
Return to menu
Power Inductors for Critical Applications ST591PYA
■ꢀ High current and very low DCR
■ꢀ Soft saturation makes them ideal for VRM/VRD applications
Core material Composite
Environmental RoHS compliant, halogen free
Terminations Tin-silver (96.5/3.5) over copper
Weight 4.5 – 4.9 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick,
20 mm pocket spacing, 5.2 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR
Irms (A)6
SRF
typ4
(mOhms)3
typ
Inductance2
(µH)
Percent
Isat5
20°C
rise
40°C
rise
Irms Testing
Part number1
tolerance
max
(MHz)
(A)
Irms testing was performed on a
0.060" thick pcb with 4 oz. copper
traces optimized to minimize
additional temperature rise.
ST591PYA631_LZ
ST591PYA931_LZ
ST591PYA132_LZ
ST591PYA222_LZ
ST591PYA302_LZ
0.63
0.93
1.3
2.2
3.0
30, 20
30, 20
30, 20
30, 20
30, 20
1.50
2.00
2.50
4.16
5.86
1.70
2.20
2.70
4.80
6.80
50
42
33
23
19
74
60
56
46
37
21.0
18.7
17.2
14.2
12.0
28.5
24.7
24.0
18.0
15.7
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components.Therefore temper-
ature rise should be verified in
application conditions.
1. When ordering, please specify tolerance code:
ST591PYA302NLZ
Tolerance: N = 30%, M = 20%
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
These parts are preproduction products
Document ST1032-1 Revised 06/07/17
®
available for evaluation only.
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2017