1008CHIPINDUCTORS
Chip Inductors for Critical Applications ST413RAD
■ Highest Q factors for this body size, roughly 20% higher
than our xx413RAA parts.
■ Exceptional SRFs, tight tolerance and batch consistency
Inductance3
(nH)
Percent
SRF min5
(GHz)
DCR max6
(OhST)
Imax
Part number1
tolerance
Q min4
(A)
ST413RAD3N0_LZ2
ST413RAD4N1_LZ
ST413RAD7N8_LZ2
ST413RAD10N_LZ
ST413RAD12N_LZ
3.0 @ 50 MHz
4.1 @ 50 MHz
7.8 @ 50 MHz
10 @ 50 MHz
12 @ 50 MHz
5
5
5
5,2
5,2
57 @ 1000 MHz
75 @ 1000 MHz
51 @ 500 MHz
60 @ 500 MHz
57 @ 500 MHz
>5.00
>5.00
3.80
3.20
2.40
38
50
50
60
60
1.8
1.8
1.6
1.5
1.5
ST413RAD18N_LZ
ST413RAD22N_LZ
ST413RAD33N_LZ
ST413RAD36N_LZ
ST413RAD39N_LZ
18 @ 50 MHz
22 @ 50 MHz
33 @ 50 MHz
36 @ 50 MHz
39 @ 50 MHz
5,2
5,2
5,2
5,2
5,2
62 @ 350 MHz
62 @ 350 MHz
49 @ 150 MHz
57 @ 150 MHz
45 @ 150 MHz
2.10
2.05
1.70
1.40
1.30
70
70
90
90
90
1.4
1.4
1.2
1.1
1.1
ST413RAD47N_LZ
ST413RAD56N_LZ
ST413RAD68N_LZ
ST413RAD82N_LZ
ST413RADR10_LZ
47 @ 50 MHz
56 @ 50 MHz
68 @ 50 MHz
82 @ 50 MHz
100 @ 50 MHz
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
45 @ 150 MHz
43 @ 150 MHz
54 @ 150 MHz
54 @ 150 MHz
51 @ 150 MHz
1.45
1.08
1.15
1.06
0.82
120
120
130
160
160
0.95
0.95
0.85
0.80
0.80
1. When ordering, specify tolerance, termination and testing codes:
ST413RADR10GLZ
Tolerance: F 1% G = 2% J = 5%
Termination: L =RoHS compliant silver-palladium-platinum glass frit.
Special order:
Core material Ceramic
Terminations Silver-palladium-platinum-glass frit.
Ambient temperature –40°C to +125°C with Imax current, +125°C
to +140°C with derated current
Storage temperature Component: –55°C to +140°C.
Tape and reel packaging: –55°C to +80°C
S =Tin-lead (63/37) over silver-platinum-glass frit.
T =Tin-silver-copper (95.5/4/0.5) over silver-platinum-
glass frit.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Testing:
Z =COTS
H =Screening per Coilcraft CP-SA-10001
Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C
2. Part is wound on low profile coilform.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
3. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer or equivalent with Coilcraft-provided
correlation pieces.
85% relative humidity)
Packaging 2000/7″reel
Standard height parts: Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.8 mm pocket depth
Low profile parts: Plastic tape: 8 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
4. Q measured using an Agilent/HP 4291A with an AgilentHP 16197A
test fixture or equivalents.
5. SRF measured using an Aglilent/HP 8753ES network analyzeror
equivalent and a Coilcraft SMD-D test fixture.
6. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document ST190-1 Revised 11/06/12
®
This product may not be used in medical or high
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
risk applications without prior Coilcraft approval.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012