1008CHIPINDUCTORS
Chip Inductors for Critical Applications ST413RAB
•ꢀLowerꢀDCRꢀthanꢀotherꢀ1008ꢀinductors
•ꢀFerriteꢀconstructionꢀforꢀhighꢀcurrentꢀhandling
•ꢀInductanceꢀvalues:ꢀ1.0ꢀ–ꢀ100ꢀµH
Inductance2
(µH)
Percent
tolerance
SRF min4
(MHz)
DCR max5
(Ohms)
Imax
(mA)
Part number1
Q min3
ST413RAB102XJLZ
ST413RAB122XJLZ
ST413RAB152XJLZ
ST413RAB182XJLZ
ST413RAB222XJLZ
1.0@7.9MHz
1.2@7.9MHz
1.5@7.9MHz
1.8@7.9MHz
2.2@7.9MHz
5
5
5
5
5
16@2.5MHz
18@2.5MHz
20@2.5MHz
20@2.5MHz
28@2.5MHz
230
210
190
170
150
0.62
0.68
0.76
0.84
1.10
370
370
370
370
310
ST413RAB272XJLZ
ST413RAB332XJLZ
ST413RAB392XJLZ
ST413RAB432XJLZ
ST413RAB472XJLZ
2.7@7.9MHz
3.3@7.9MHz
3.9@7.9MHz
4.3@7.9MHz
4.7@7.9MHz
5
5
5
5
5
20@2.5MHz
20@2.5MHz
22@2.5MHz
24@2.5MHz
24@2.5MHz
135
120
105
85
1.28
1.46
1.56
1.70
1.68
270
260
250
230
230
90
ST413RAB502XJLZ
ST413RAB562XJLZ
ST413RAB622XJLZ
ST413RAB682XJLZ
ST413RAB822XJLZ
5.0@7.9MHz
5.6@7.9MHz
6.2@7.9MHz
6.8@7.9MHz
8.2@7.9MHz
5
5
5
5
5
23@2.5MHz
23@2.5MHz
24@2.5MHz
24@2.5MHz
23@2.5MHz
30
80
75
70
65
2.20
1.82
2.50
2.00
2.65
200
220
195
210
190
ST413RAB912XJLZ
ST413RAB103XJLZ
ST413RAB123XJLZ
ST413RAB153XJLZ
ST413RAB183XJLZ
9.1@7.9MHz
10@7.9MHz
12@2.5MHz
15@2.5MHz
18@2.5MHz
5
5
5
5
5
25@2.5MHz
24@2.5MHz
28@2.5MHz
28@2.5MHz
28@2.5MHz
57
60
38
30
26
2.90
2.95
3.30
3.70
4.00
170
165
160
150
140
ST413RAB223XJLZ
ST413RAB273XJLZ
ST413RAB333XJLZ
ST413RAB393XJLZ
ST413RAB473XJLZ
22@2.5MHz
27@2.5MHz
33@2.5MHz
39@2.5MHz
47@2.5MHz
5
5
5
5
5
28@2.5MHz
28@2.5MHz
30@2.5MHz
29@2.5MHz
30@2.5MHz
22
12
19
26
12
6.14
6.45
7.00
10.0
10.7
115
110
110
90
80
ST413RAB563XJLZ
ST413RAB683XJLZ
ST413RAB104XJLZ
56@2.5MHz
68@0.79MHz
100@0.79MHz
5
5
5
20@0.79MHz
17@0.79MHz
18@0.79MHz
8.0
5.7
4.5
10.0
13.5
20.5
95
85
65
1. When ordering, please specify termination and testing codes:
Core material Ceramic/Ferrite
Terminations RoHS compliant silver-palladium-platinum-glass frit.
ST413RAB104JLZ
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order:
Other terminations available at additional cost.
Weight 38.3ꢀ–ꢀ41.0ꢀmg
Ambient temperatureꢀ –40°Cꢀtoꢀ+85°CꢀwithꢀImaxꢀcurrent,ꢀ+85°Cꢀtoꢀ
+100°Cꢀwithꢀderatedꢀcurrent
T = Tin-silver-copper (95.5/4/0.5) over silver-palladium-
platinum-glass frit or
S = Tin-lead (63/37) over silver-palladium-platinum-
Storage temperatureꢀ Component:ꢀ–55°Cꢀtoꢀ+100°C.ꢀ
glass frit.
Tapeꢀandꢀreelꢀpackaging:ꢀ–55°Cꢀtoꢀ+80°C
Testing:
Z = COTS
Resistance to soldering heat Max three 40 second reflows at
+260°C,ꢀpartsꢀcooledꢀtoꢀroomꢀtemperatureꢀbetweenꢀcycles
H = Screening per Coilcraft CP-SA-10001
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer or equivalent with Coilcraft-provided
correlation pieces.
3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16197 test
fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent with a Coilcraft SMD-D fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
Temperature Coefficient of Inductance (TCL)ꢀ +25ꢀtoꢀ+125ꢀppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 2000/7″ reel; 7500/13″ reel.
Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing,
2.0 mm pocket depth
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document ST103-1 Revised 12/05/12
®
This product may not be used in medical or high
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
risk applications without prior Coilcraft approval.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012