Datasheet > ST-2

ST-2

更新时间： 2024-02-10 12:53:16

品牌	Logo	应用领域
MICRONETICS		二极管
页数	文件大小	规格书
1页	40K
描述
MINI-NOISE DIODES 10 KHZ TO 3 GHZ

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ST-2 数据手册

ST-2 MINI-NOISE

DIODES

10 KHZ TO 3 GH

ESCRIPTION

Micronetics' ST-2 Diode with

its small, surface mount SOT-

23 package are ideally suited

for medium and high volume

production circuits. Their

Gaussian wideband highly

stable noise characteristics

make them ideal for several

applications from built-in

Microwave receiver calibra-

tion, to A/D dithering.

INOUT

MINI -NOISE DIODE SPECIFICATIONS

Pin 1 - Ground

Pin 2 - Bias/Noise Output

Pin 3 - N/C

MODEL

FREQUENCY

RANGE

OUTPUT (1) FLATNESS (2) TYP BIAS (2)

TYP DC+

NUMBER

ENRdB (min)

dB (max)

CURRENT (max) BIAS

ST-2

10 KHz - 1 MHz

1 MHz – 100 MHz

100 MHz – 3 GHz

2.0

2-4 mA

5.2v

See style code Z on our web-

site for additional outline

details:

http://www.micronetics.com

(1) ENR is measured in a 50 ohm system.

(2) Spectral response varies with bias current. Differing levels of ENR and in-band flatness

can be realized by adjusting bias current.

Application Notes:

Microwave Receiver Calibration: There are two built-in tests commonly performed with

noise. One is a straightforward noise figure or noise temperature test. The other is a spec-

tral calibration, which uses the broadband flat frequency output of the noise to test frequen-

cy response. This test typically requires a higher amplitude noise signal than the noise

temperature test and may require a gain stage to boost the signal.

A/D Converter Dithering Circuit: Sensitivity can be increased significantly when summing

low frequency noise (in the range of 10 KHz - 5 MHz depending on the A/D converter) with

the IF frequency prior to the input of the A/D Converter. The noise signal amplitude needs

to be boosted significantly from the output of the noise diode. Designers usually take two

approaches, one at 50 ohm in which standard radio frequency gain blocks are used and

the noise is combined with the signal at 50 ohms. The signal +noise is then converted to

high impedance prior to being fed into the A/D. The second uses op amps to boost the

noise signal and the noise is summed with the signal all at high impedance and fed directly

into the A/D.

Encryption: In this usage, the Gaussian output of the noise is used to generate random

numbers by sampling the voltage of the noise using an A/D converter. Frequency require-

ments are usually a function of the system parameters of the random numbers desired. As

with the dithering circuit, the noise amplitude form the diode needs to be boosted with gain.

These circuits are typically high impedance.

MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987

WEB: WWW.MICRONETICS.COM

中文翻译

下载PDF

与ST-2相关器件

型号	品牌	获取价格	描述	数据表
ST2,5/1P	PHOENIX	获取价格	Modular Terminal Block, 24A, 4mm2, 1 Row(s), 1 Deck(s),
ST2,5-TWINGN	PHOENIX	获取价格	Modular Terminal Block
ST2.8-31-06L	ETC	获取价格	Analog IC
ST20	STMICROELECTRONICS	获取价格	ST20 software development and debugging tools
ST20	ARCH	获取价格	Encapsulated DC-DC Converter
ST2001FX	STMICROELECTRONICS	获取价格	HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR
ST2001HI	STMICROELECTRONICS	获取价格	HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR
ST2002DG	SEMTECH	获取价格	2x5MM(RECTANGULAR TYPE)(GAP) LED LAMP
ST2002DR	SEMTECH	获取价格	2x5MM(RECTANGULAR TYPE)(GAP) LED LAMP
ST2002DY	SEMTECH	获取价格	2x5MM(RECTANGULAR TYPE)(GAP) LED LAMP

与ST-2相关文章

BSS138LT3G：一款高效能N沟道MOSFET的全面解析
2024-07-04

4
解读EGP10B二极管资料手册：产品特性、参数分析
2024-07-04

4
RT9164AGG手册资料详解：引脚信息、设计指南
2024-07-04

4
2SA1037KPT资料详解：产品特性、电气参数、设计指南
2024-07-04

5

产品中心

服务支持

精选活动

关于我们

帮助中心

ST-2

ST-2 数据手册

与ST-2相关器件

与ST-2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ST-2

ST-2 数据手册

与ST-2相关器件

与ST-2相关文章

您还可以找

您在本页遇到什么问题？