5秒后页面跳转
SST39SF020A-70-4C-NH PDF预览

SST39SF020A-70-4C-NH

更新时间: 2024-11-25 22:59:19
品牌 Logo 应用领域
SST 闪存内存集成电路
页数 文件大小 规格书
22页 270K
描述
1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash

SST39SF020A-70-4C-NH 数据手册

 浏览型号SST39SF020A-70-4C-NH的Datasheet PDF文件第2页浏览型号SST39SF020A-70-4C-NH的Datasheet PDF文件第3页浏览型号SST39SF020A-70-4C-NH的Datasheet PDF文件第4页浏览型号SST39SF020A-70-4C-NH的Datasheet PDF文件第5页浏览型号SST39SF020A-70-4C-NH的Datasheet PDF文件第6页浏览型号SST39SF020A-70-4C-NH的Datasheet PDF文件第7页 
1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash  
SST39SF010A / SST39SF020A / SST39SF040  
SST39SF010A / 020A / 0405.0V 4Mb (x8) MPF memories  
Preliminary Specification  
FEATURES:  
Organized as 128K x8 / 256K x8 / 512K x8  
Single 5.0V Read and Write Operations  
Superior Reliability  
Fast Erase and Byte-Program:  
Sector-Erase Time: 18 ms (typical)  
Chip-Erase Time: 70 ms (typical)  
Byte-Program Time: 14 µs (typical)  
Chip Rewrite Time:  
– Endurance: 100,000 Cycles (typical)  
– Greater than 100 years Data Retention  
2 seconds (typical) for SST39SF010A  
4 seconds (typical) for SST39SF020A  
8 seconds (typical) for SST39SF040  
Low Power Consumption:  
Active Current: 10 mA (typical)  
Standby Current: 30 µA (typical)  
Automatic Write Timing  
Internal VPP Generation  
End-of-Write Detection  
Sector-Erase Capability  
Uniform 4 KByte sectors  
Fast Read Access Time:  
45 and 70 ns  
Toggle Bit  
Data# Polling  
TTL I/O Compatibility  
Latched Address and Data  
JEDEC Standard  
Flash EEPROM Pinouts and command sets  
Packages Available  
32-pin PLCC  
32-pin TSOP (8mm x 14mm)  
32-pin PDIP  
PRODUCT DESCRIPTION  
The SST39SF010A/020A/040 are CMOS Multi-Purpose  
Flash (MPF) manufactured with SSTs proprietary, high  
performance CMOS SuperFlash technology. The split-gate  
cell design and thick oxide tunneling injector attain better  
reliability and manufacturability compared with alternate  
approaches. The SST39SF010A/020A/040 devices write  
(Program or Erase) with a 5.0V power supply. The  
SST39SF010A/020A/040 devices conform to JEDEC stan-  
dard pinouts for x8 memories.  
function of the applied voltage, current, and time of applica-  
tion. Since for any given voltage range, the SuperFlash  
technology uses less current to program and has a shorter  
erase time, the total energy consumed during any Erase or  
Program operation is less than alternative flash technolo-  
gies. These devices also improve flexibility while lowering  
the cost for program, data, and configuration storage appli-  
cations.  
The SuperFlash technology provides fixed Erase and Pro-  
gram times, independent of the number of Erase/Program  
cycles that have occurred. Therefore the system software  
or hardware does not have to be modified or de-rated as is  
necessary with alternative flash technologies, whose Erase  
and Program times increase with accumulated Erase/Pro-  
gram cycles.  
Featuring high performance Byte-Program, the  
SST39SF010A/020A/040 devices provide a maximum  
Byte-Program time of 20 µsec. These devices use Toggle  
Bit or Data# Polling to indicate the completion of Program  
operation. To protect against inadvertent write, they have  
on-chip hardware and Software Data Protection schemes.  
Designed, manufactured, and tested for a wide spectrum of  
applications, these devices are offered with a guaranteed  
endurance of 10,000 cycles. Data retention is rated at  
greater than 100 years.  
To meet high density, surface mount requirements, the  
SST39SF010A/020A/040 are offered in 32-pin PLCC and  
32-pin TSOP packages. A 600 mil, 32-pin PDIP is also  
available. See Figures 1, 2, and 3 for pinouts.  
The SST39SF010A/020A/040 devices are suited for appli-  
cations that require convenient and economical updating of  
program, configuration, or data memory. For all system  
applications, they significantly improve performance and  
reliability, while lowering power consumption. They inher-  
ently use less energy during erase and program than alter-  
native flash technologies. The total energy consumed is a  
Device Operation  
Commands are used to initiate the memory operation func-  
tions of the device. Commands are written to the device  
using standard microprocessor write sequences. A com-  
mand is written by asserting WE# low while keeping CE#  
©2001 Silicon Storage Technology, Inc.  
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.  
MPF is a trademark of Silicon Storage Technology, Inc.  
S71147-02-000 5/01  
1
398  
These specifications are subject to change without notice.  

与SST39SF020A-70-4C-NH相关器件

型号 品牌 获取价格 描述 数据表
SST39SF020A-70-4C-NHE SST

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-NHE MICROCHIP

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-NHE-T MICROCHIP

获取价格

暂无描述
SST39SF020A-70-4C-PH SST

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-PHE SST

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-PHE MICROCHIP

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-U1 SST

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-WH SST

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-WHE SST

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash
SST39SF020A-70-4C-WHE MICROCHIP

获取价格

1 Mbit / 2 Mbit / 4 Mbit (x8) Multi-Purpose Flash