Datasheet > SST26VF016BEUI-104I/SN

SST26VF016BEUI-104I/SN

更新时间： 2024-11-26 20:11:39

品牌	Logo	应用领域
美国微芯 - MICROCHIP		可编程只读存储器时钟光电二极管内存集成电路
页数	文件大小	规格书
78页	2630K
描述
FLASH 3V PROM

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SST26VF016BEUI-104I/SN 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	SOIC-8	Reach Compliance Code：	unknown
Factory Lead Time：	8 weeks 6 days	风险等级：	2.07
最大时钟频率 (fCLK)：	104 MHz	数据保留时间-最小值：	100
耐久性：	100000 Write/Erase Cycles	JESD-30 代码：	R-PDSO-C48
长度：	4.89 mm	内存密度：	16777216 bit
内存集成电路类型：	FLASH	内存宽度：	8
功能数量：	1	端子数量：	8
字数：	2097152 words	字数代码：	2000000
工作模式：	SYNCHRONOUS	最高工作温度：	85 °C
最低工作温度：	-40 °C	组织：	2MX8
封装主体材料：	PLASTIC/EPOXY	封装代码：	LSOP
封装等效代码：	SOP8,.3	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, LOW PROFILE	并行/串行：	SERIAL
编程电压：	3 V	反向引出线：	NO
座面最大高度：	1.68 mm	串行总线类型：	SPI
最大待机电流：	0.000025 A	最大压摆率：	0.025 mA
最大供电电压 (Vsup)：	3.6 V	最小供电电压 (Vsup)：	2.7 V
标称供电电压 (Vsup)：	3 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	宽度：	3.9 mm
写保护：	HARDWARE/SOFTWARE	Base Number Matches：	1

SST26VF016BEUI-104I/SN 数据手册

浏览型号SST26VF016BEUI-104I/SN的Datasheet PDF文件第2页

浏览型号SST26VF016BEUI-104I/SN的Datasheet PDF文件第3页

浏览型号SST26VF016BEUI-104I/SN的Datasheet PDF文件第4页

浏览型号SST26VF016BEUI-104I/SN的Datasheet PDF文件第5页

浏览型号SST26VF016BEUI-104I/SN的Datasheet PDF文件第6页

SST26VF016BEUI

16 Mbit Serial Quad I/O (SQI) Flash Memory with EUI-48™

and EUI-64™ Identifier

- 64 KByte blocks, two 32 KByte blocks, and

eight 8 KByte parameter blocks

Features

• Factory-Programmed with EUI-48 and EUI-64

- Read Protection on top and bottom 8 KByte

Globally Unique Identifier

parameter blocks

- Secure, read-only access in Serial Flash

• Security ID

Discoverable Parameter (SFDP) table

- One-Time Programmable (OTP) 2 KByte,

• Single Voltage Read and Write Operations

Secure ID

- 2.7-3.6V or 2.3-3.6V

- 64 bit unique, factory pre-programmed

identifier

• Serial Interface Architecture

- Nibble-wide multiplexed I/O’s with SPI-like serial

- User-programmable area

command structure

• Temperature Range

- Mode 0 and Mode 3

- Industrial: -40°C to +85°C

- x1/x2/x4 Serial Peripheral Interface (SPI) Protocol

• Automotive AECQ-100 Qualified

• High Speed Clock Frequency

• Packages Available

- 2.7-3.6V: 104 MHz max

- 2.3-3.6V: 80 MHz max

• All devices are RoHS compliant

• Burst Modes

- 8-lead SOIC (3.90 mm)

- Continuous linear burst

- 8/16/32/64 Byte linear burst with wrap-around

Product Description

The Serial Quad I/O™ (SQI™) family of flash-memory

devices features a six-wire, 4-bit I/O interface that

allows for low-power, high-performance operation in a

low pin-count package. SST26VF016BEUI also sup-

ports full command-set compatibility to traditional Serial

Peripheral Interface (SPI) protocol. System designs

using SQI flash devices occupy less board space and

ultimately lower system costs.

• Superior Reliability

- Endurance: 100,000 Cycles (min)

- Greater than 100 years Data Retention

• Low Power Consumption:

- Active Read current: 15 mA (typical @ 104 MHz)

- Standby Current: 15 µA (typical)

• Fast Erase Time

- Sector/Block Erase: 18 ms (typ), 25 ms (max)

- Chip Erase: 35 ms (typ), 50 ms (max)

All members of the 26 Series, SQI family are manufac-

tured with proprietary, high-performance CMOS Super-

Flash® technology. The split-gate cell design and thick-

oxide tunneling injector attain better reliability and man-

ufacturability compared with alternate approaches.

• Page-Program

- 256 Bytes per page in x1 or x4 mode

• End-of-Write Detection

SST26VF016BEUI significantly improves performance

and reliability, while lowering power consumption.

These devices write (Program or Erase) with a single

power supply of 2.3-3.6V. The total energy consumed

is a function of the applied voltage, current, and time of

application. Since for any given voltage range, the

SuperFlash technology uses less current to program

and has a shorter erase time, the total energy con-

sumed during any Erase or Program operation is less

than alternative flash memory technologies.

- Software polling the BUSY bit in status register

• Flexible Erase Capability

- Uniform 4 KByte sectors

- Four 8 KByte top and bottom parameter overlay

blocks

- One 32 KByte top and bottom overlay blocks

- Uniform 64 KByte overlay blocks

• Write-Suspend

- Suspend Program or Erase operation to access

another block/sector

SST26VF016BEUI is offered in 8-lead SOIC (3.90

mm). See Figure 2-1 for pin assignments.

• Software Reset (RST) mode

• Software Write Protection

- Individual-Block Write Protection with permanent

lock-down capability

 2019 Microchip Technology Inc.

DS20006153A-page 1

12 3 4 5 6 7...78

中文翻译

下载PDF

与SST26VF016BEUI-104I/SN相关器件

型号	品牌	获取价格	描述	数据表
SST26VF016BT-104I/MF	MICROCHIP	获取价格	IC FLASH 2.7V PROM, Programmable ROM
SST26VF016BT-104I/SM	MICROCHIP	获取价格	IC FLASH 2.7V PROM, Programmable ROM
SST26VF016BT-104I/SN	MICROCHIP	获取价格	IC FLASH 2.7V PROM, Programmable ROM
SST26VF016BT-104V/MF	MICROCHIP	获取价格	2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF016BT-104V/SM	MICROCHIP	获取价格	2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF016BT-104V/SN	MICROCHIP	获取价格	2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF020A	MICROCHIP	获取价格	The SST26VF020A Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial
SST26VF032	SST	获取价格	Serial Quad I/O SQI Flash Memory
SST26VF032-80-5I-QAE-T	MICROCHIP	获取价格	IC,SERIAL EEPROM,NOR FLASH,4MX8,CMOS,LLCC,8PIN,PLASTIC
SST26VF032-80-5I-QE	SST	获取价格	Serial Quad I/O (SQI) Flash Memory

与SST26VF016BEUI-104I/SN相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

45
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

34
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

62
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

59

产品中心

服务支持

精选活动

关于我们

帮助中心

SST26VF016BEUI-104I/SN

SST26VF016BEUI-104I/SN 技术参数

SST26VF016BEUI-104I/SN 数据手册

与SST26VF016BEUI-104I/SN相关器件

与SST26VF016BEUI-104I/SN相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SST26VF016BEUI-104I/SN

SST26VF016BEUI-104I/SN 技术参数

SST26VF016BEUI-104I/SN 数据手册

与SST26VF016BEUI-104I/SN相关器件

与SST26VF016BEUI-104I/SN相关文章

您还可以找

您在本页遇到什么问题？