深圳市明烽威电子有限公司
QQ:597204924
手机:15118133175 联系人:连俊良
SSL5015TE
Compact non-dimmable LED driver IC
Rev. 2 — 26 February 2014
Product data sheet
1. General description
The SSL5015TE is a high-voltage Integrated Circuit (IC) controller with an integrated
MOSFET for driving LED lamps in general mains non-dimmable lighting applications. The
IC is dedicated to 100 V (AC) or 120 V (AC) input applications.
The main benefits of these products are:
• Small Printed-Circuit Board (PCB) footprint, and compact solution
• High efficiency (up to 93 %)
• High input power factor (> 0.95); low Total Harmonic Distortion (THD; < 20 %)
• Intermediate power factor (PF > 0.7); low ripple (< 5 %); minimum external
component count
• Enhanced power capability
• Low electronic Bill Of Material (BOM)
The SSL5015TE operates in Boundary Conduction Mode (BCM) with peak current
modulation, providing an input power factor correction. The IC is typically configured to a
buck converter. It can start up directly from the HV pin using an internal high-voltage
current source. When the converter is switching, VCC is supplied through the DVDT pin by
a capacitor coupled to the DRAIN pin or by an auxiliary supply. This feature simplifies the
V
CC supply. It allows a low-cost off-the-shelf inductor to be used, providing flexibility in
application design. The IC supply current is 1.3 mA.
The SSL5015TE comes in a compact HSO8 package incorporating an exposed pad to
enhance the thermal capability for high-power applications, like 18 W T-LEDs or higher
power lamps.
2. Features and benefits
Driving LED strings from a rectified mains supply
Highly integrated switch mode LED driver with integrated 300 V (DC) power switches
Efficient BCM operation with:
No reverse recovery losses in freewheel diode
Zero Current Switching (ZCS) for turn-on of switch
Zero voltage or valley switching for turn-on of switch
Minimal required inductance value and size
Direct PWM current regulation possible
Fast transient response through peak current mode control: