B
u
r
r
Ć
B
r
o
w
n
P
r
o
d
u
c
t
s
SRC4392
f
r
o
m
T
e
x
a
s
I
n
s
t
r
u
m
e
n
t
s
SRC4392
SBFS029B–DECEMBER 2005–REVISED APRIL 2006
Two-Channel, Asynchronous Sample Rate Converter with
Integrated Digital Audio Interface Receiver and Transmitter
FEATURES
•
Digital Audio Interface Receiver (DIR)
•
Two-Channel Asynchronous Sample Rate
Converter (SRC)
– PLL Lock Range Includes Sampling Rates
from 20kHz to 216kHz
– Dynamic Range with –60dB Input
(A-Weighted): 144dB typical
– Includes Four Differential Input Line
Receivers and an Input Multiplexer
– Total Harmonic Distortion and Noise
(THD+N) with Full-Scale Input: –140dB
typical
– Bypass Multiplexer Routes Line Receiver
Outputs to Line Driver and Buffer Outputs
– Block-Sized Data Buffers for Both Channel
Status and User Data
– Supports Audio Input and Output Data
Word Lengths Up to 24 Bits
– Automatic Detection of Non-PCM Audio
Streams (DTS CD/LD and IEC 61937
formats)
– Supports Input and Output Sampling
Frequencies Up to 216kHz
– Automatic Detection of the Input-to-Output
Sampling Ratio
– Audio CD Q-Channel Sub-Code Decoding
and Data Buffer
– Wide Input-to-Output Conversion Range:
16:1 to 1:16 Continuous
– Status Registers and Interrupt Generation
for Flag and Error Conditions
– Excellent Jitter Attenuation Characteristics
– Low Jitter Recovered Clock Output
Two Audio Serial Ports (Ports A and B)
– Digital De-Emphasis Filtering for 32kHz,
44.1kHz, and 48kHz Input Sampling Rates
•
– Synchronous Serial Interface to External
Signal Processors, Data Converters, and
Logic
– Digital Output Attenuation and Mute
Functions
– Output Word Length Reduction
– Slave or Master Mode Operation with
Sampling Rates up to 216kHz
– Status Registers and Interrupt Generation
for Sampling Ratio and Ready Flags
– Supports Left-Justified, Right-Justified, and
Philips I2S™ Data Formats
•
Digital Audio Interface Transmitter (DIT)
– Supports Sampling Rates Up to 216kHz
– Supports Audio Data Word Lengths Up to
24 Bits
– Includes Differential Line Driver and
CMOS Buffered Outputs
•
•
Four General-Purpose Digital Outputs
– Multifunction Programmable Via Control
Registers
– Block-Sized Data Buffers for Both Channel
Status and User Data
Extensive Power-Down Support
– Status Registers and Interrupt Generation
for Flag and Error Conditions
– Functional Blocks May Be Disabled
Individually When Not In Use
•
User-Selectable Serial Host Interface: SPI or
Philips I2C™
•
•
Operates From +1.8V Core and +3.3V I/O
Power Supplies
– Provides Access to On-Chip Registers and
Data Buffers
Small TQFP-48 Package, Compatible with the
SRC4382 and DIX4192
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Dolby is a registered trademark of Dolby Laboratories.
I2C, I2S are trademarks of Koninklijke Philips Electronics N.V.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2006, Texas Instruments Incorporated